Metal Fatigue Ruled Probable Cause Of 2005 Bell 206B Accident | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.14.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Thu, May 31, 2007

Metal Fatigue Ruled Probable Cause Of 2005 Bell 206B Accident

Witness Tells Investigators Main Rotor Severed Cabin

A helicopter involved in a 2005 fatal accident in Perth, Scotland was cut in two by its own rotor blades, investigators informed a fatal accident inquiry board at the Perth Sheriff Court Tuesday.

The Bell 206B Jet Ranger II (type shown above) was flying from Cumbernauld to Aberdeen on December 21, 2005 on a gas pipeline inspection run for the National Grid when it crashed near Coupar Angus, killing the pilot and observer.

A catastrophic failure in the rear of the aircraft that tore the stabilizer fin, rear rotor blade and gear box from their mountings is said to be at fault, according to the Dundee Courier.

Witnesses reported seeing the helicopter "fall apart" in mid-air before nose-diving to the ground, killing pilot Robert Philip Ward, 48, of Glasgow, and observer Edward Lapsley, 56, of Tyne and Wear.

The helo was scheduled for a routine maintenance inspection when they were through with the job.

According to the BBC, witness Andrew Brown told the inquiry, "Suddenly bits started flying off it. The tail broke up first. The rotor from the tail was breaking and the whole tail came off. That seemed to break first and get entangled with the main rotor. It started dropping straight away. It just went straight down."

The Air Accidents Investigations Branch, which is responsible for the investigation of civil aircraft accidents in the UK, concluded the crash had ultimately been caused by metal fatigue.

AAIB inspector Keith Conradie said the investigation quickly focused on the helicopter's tail.

"The first items in the wreckage trail were items associated with the rear part of the helicopter. Found first in the accident location were the vertical fin and the stinger, which hangs underneath the vertical fin," he said.

"The vertical fin came away, swinging underneath and into the area of the tail rotor," he continued. "This caused the tail rotor and gear box to depart from the helicopter."

He said the loss of the tail rotor and the loss of mass would have made the aircraft "impossible to control, as it would have become "nose heavy" and would have quickly started to dive.

"It appears that the main rotor-blades flexed and struck the tail boom as the pilot attempted to lift the helicopter out of the nose dive," Conradie said. "They then flexed again, striking the cabin. The front of the cabin was cut off."

FMI: www.aaib.dft.gov.uk/home/index.cfm

Advertisement

More News

Classic Aero-TV: Remembering Bob Hoover

From 2023 (YouTube Version): Legacy of a Titan Robert (Bob) Anderson Hoover was a fighter pilot, test pilot, flight instructor, and air show superstar. More so, Bob Hoover was an i>[...]

ANN FAQ: Follow Us On Instagram!

Get The Latest in Aviation News NOW on Instagram Are you on Instagram yet? It's been around for a few years, quietly picking up traction mostly thanks to everybody's new obsession >[...]

ANN's Daily Aero-Linx (05.15.24)

Aero Linx: B-52H Stratofortress The B-52H Stratofortress is a long-range, heavy bomber that can perform a variety of missions. The bomber is capable of flying at high subsonic spee>[...]

ANN's Daily Aero-Term (05.15.24):Altimeter Setting

Altimeter Setting The barometric pressure reading used to adjust a pressure altimeter for variations in existing atmospheric pressure or to the standard altimeter setting (29.92).>[...]

Aero-News: Quote of the Day (05.16.24)

"Knowing that we play an active part in bettering people's lives is extremely rewarding. My team and I are very thankful for the opportunity to be here and to help in any way we ca>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC