FAA Issues Lycoming Crankshaft AD | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Tue, Sep 20, 2005

FAA Issues Lycoming Crankshaft AD

Agency Calls For Replacing Shafts In Some 360 and 540 Models

The FAA has issued an airworthiness directive calling for crankshaft replacement in certain 360 and 540 engines built or with crankshafts replaced after March 1, 1999. As AOPA first told you in July, this AD affects some 1,100 aircraft, in models ranging from Aero Commanders and Aerostars to Socata Trinidads. Many of the affected aircraft are Robinson helicopters and late-model Cessna 182s.

You'll need to know your engine model, engine serial number, date of manufacture, and horsepower rating to determine if your engine is affected (see Lycoming's service bulletin).

"Lycoming tells AOPA that some 238 engines have already been sent to the factory in response to the earlier service bulletin, and the company has completed repairs on about half of them already," said Luis Gutierrez, AOPA director of regulatory and certification policy. "The company has been in direct contact with the owners of more than 660 of the affected aircraft."

This is a continuation of the problem that affected high-powered, large-bore turbocharged Lycomings three years ago. Those crankshafts weren't strong enough (why is still a matter under litigation between Lycoming and the crankshaft supplier), and now Lycoming has determined that crankshafts made with the same process used in lower-powered engines could also have problems.

Lycoming will pay for replacing the crankshaft and shipping the engine to and from Lycoming's Williamsport, Pennsylvania, factory to accomplish the work. The company will also pay a reasonable amount for the labor involved to remove and reinstall the engine.

"Lycoming officials told us that they have enough new crankshafts on hand to repair all affected engines," said Gutierrez. "They expect to complete up to 15 engines a day with a 10-day turnaround from the time the engine arrives on their dock."

The AD becomes effective October 21 and calls for compliance within the next 50 hours or 6 months, whichever comes first. See the Lycoming service bulletin, which lists the affected engines and crankshafts.

FMI: www.aopa.org/whatsnew/newsitems/2005/050714lycoming.pdf

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC