AD: Rolls-Royce Deutschland Ltd & Co KG | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Sat, Jun 06, 2020

AD: Rolls-Royce Deutschland Ltd & Co KG

AD 2020-12-03 -- Manufacturer Found That A P30 (Air Pressure) Sense Line Could Become Partially Blocked

The FAA is adopting a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG Trent XWB-97 model turbofan engines.

This AD requires updating electronic engine control (EEC) software. This AD was prompted by the manufacturer's finding that a P30 (air pressure) sense line could become partially blocked with a mixture of ice and water, which would cause a time-lag in the P30 signal, interfering with the fuel flow limit calculations. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective June 18, 2020.

Supplementary Information: The European Union Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Community, has issued EASA AD 2020-0035, dated February 26, 2020 (referred to after this as “the MCAI”), to address an unsafe condition for the specified products.

The MCAI states: During ground tests, it was found that a P30 (air pressure) sense line could become partially blocked with a mixture of ice and water, which would cause a time-lag in the P30 signal, interfering with the fuel flow limit calculations. This condition, if not corrected, could lead to loss of thrust control, possibly resulting in reduced control of the aeroplane. To address these potential unsafe conditions, Rolls-Royce defined a new EEC SW, XWB_97-7.0, P/N RRY23XWB0001024, which corrects these issues. For the reasons described above, this [EASA] AD requires updating the EEC SW. This [EASA] AD also prohibits installation of affected SW on any engine.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (05.09.24): Hold Procedure

Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]

ANN's Daily Aero-Term (05.06.24): Altitude Readout

Altitude Readout An aircraft’s altitude, transmitted via the Mode C transponder feature, that is visually displayed in 100-foot increments on a radar scope having readout cap>[...]

ANN's Daily Aero-Linx (05.06.24)

Aero Linx: European Hang Gliding and Paragliding Union (EHPU) The general aim of the EHPU is to promote and protect hang gliding and paragliding in Europe. In order to achieve this>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

Aero-News: Quote of the Day (05.07.24)

"The need for innovation at speed and scale is greater than ever. The X-62A VISTA is a crucial platform in our efforts to develop, test and integrate AI, as well as to establish AI>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC