New Lycoming AD to Affect 16,000 Customers | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Tue, Nov 05, 2024

New Lycoming AD to Affect 16,000 Customers

FAA Issues Directive Following Reports of In-Flight Shutdowns

The Federal Aviation Administration (FAA) has issued a new airworthiness directive (AD) affecting Lycoming engine models with specific connecting rod assemblies. This was prompted by a series of reports of con rod failures that caused uncontained engine breakdowns and in-flight shutdowns (IFSDs).

The directive mandates routine oil inspections to identify bronze metal particles, a potential indicator of connecting rod degradation. If any particles are detected, mechanics must perform additional checks on connecting rod bushings for signs of damage, misfit, movement, or excessive wear. Replacing compromised bushings with approved parts is required to prevent flight risks.

According to the FAA, around 16,000 engines on US aircraft, including popular IO-360 and O-320 models, fall under this directive. Inspections and potential bushing replacements are projected to incur significant costs, with estimates placing oil inspection expenses at approximately $235 per engine, connecting rod bushing inspections at $85, and bushing replacements at around $762 each.

For U.S. operators, the AD could result in roughly $3.76 million for oil inspections, $1.36 million for bushing inspections, and around $12.19 million for part replacements.

The manufacturer’s analysis concluded that certain connecting rod bushings installed between 2009 and 2017 were manufactured below specification, specifically in terms of outer diameter (OD). This substandard sizing leads to reduced retention in the connecting rod, allowing the bushing to shift within the rod assembly and suffer wear from piston forces. This misfit accelerates part failure, risking uncontained engine events.

The directive is set to take effect December 5, 2024. It does not specify an oil change frequency, so inspections can continue on each operator's maintenance schedule. Oil filters are typically evaluated at each oil change regardless of the AD, so it should not cause too much hassle unless anything concerning is found.

Given the significant risks posed, the FAA deems this AD essential for maintaining operational safety across affected Lycoming-powered aircraft.

FMI: www.faa.gov

Advertisement

More News

NTSB Final Report: Aviat A1

Airplane Bounced About 3 Ft Then Touched Back Down And Then, With No Brakes Applied, The Airplane Began Veering To The Left Analysis: The pilot entered the airport traffic pattern >[...]

ANN's Daily Aero-Linx (07.08.25)

Aero Linx: British Microlight Aircraft Association (BMAA) The primary focus within all aviation activity is SAFETY. In all aspects of our sport SAFETY must come first, whether it b>[...]

Classic Aero-TV: Fly Corvair’s Reliable Engine Alternative

From SnF25 (YouTube Edition): William Wynne Builds Practical Aircraft Engines on the Corvair Platform Seeking an affordable alternative to the traditional aircraft engine options, >[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

Classic Aero-TV: CiES Fuel-Quantity and e-Throttle Systems Praised

From 2023 (YouTube Edition): Bridge of CiES CiES Inc. is a Bend, Oregon-based designer and manufacturer of modular embedded aircraft systems and sensors. The company’s fuel-l>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC