AeroSports Update: Beware Of Jack Frost | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Mon, Nov 02, 2015

AeroSports Update: Beware Of Jack Frost

As Colder Weather Approaches It’s Important To Understand The Dangers Of Frost On The Aircraft

The basic theory regarding the formation of ice is quite simple; it requires below freezing temperatures and moisture. That makes it pretty easy to understand from the broadest point of view to determine when ice will or will not occur. However, when it comes to frost things get a little more complicated.

We are primarily concerned about frost when we see it on an airplane prior to flight. What seems like a very light coating of frozen moisture, is actually a rough surface that, if left on the wings and other lifting and control surfaces of the aircraft, can degrade performance to such an extent that it may not be safe to fly.

The age-old principle of frost formation is if a solid surface is chilled below the dew point of the surrounding humid air and the surface itself is colder than freezing, ice (frost) will form on it. If the air is moist, desublimation of the water vapor occurs and frost appears. In this case, the surface we are talking about is the airframe of an airplane.

There’s more to it than that, but because frost requires moisture, a close temperature dew point spread and a surface that is freezing, it makes it easier to understand how to avoid it. The most logical way to avoid a morning frost on an airplane is to keep it in a hangar that is above freezing, even if only by a couple of degrees.

If frost does form on an airplane it’s absolutely mandatory that it at least be removed from the wings, the tail surfaces, and all control surfaces. Leaving any of these surfaces with any frost can lead to asymmetrical stalls resulting in uncontrolled rolling of the airplane at lift off. At the very minimum, frost could increase the stall speed by a significant amount and reduce the airplane’s wing lift capacity by as much as 30 percent.

Many pilots have heard that polishing the frost is another way to decrease its detrimental effect on aircraft performance, but there is actually very little information available to prove that this is effective.

Frost may look harmless, but it has been a major contributor to the loss of control in the early stages of the flight.

FMI: Aviation Weather For Pilots

Advertisement

More News

NTSB Final Report: Douglas A-4K

Pilot Applied Full Aft Stick And Nose-Up Trim, But The Airplane Remained On The Runway Analysis: The pilot reported that a preflight inspection and flight control checks revealed n>[...]

ANN FAQ: Q&A 101

A Few Questions AND Answers To Help You Get MORE Out of ANN! 1) I forgot my password. How do I find it? 1) Easy... click here and give us your e-mail address--we'll send it to you >[...]

Classic Aero-TV: PBY Catalina--From Wartime to Double Sunrise to the Long Sunset

From 2022 (YouTube Edition): Before They’re All Gone... Humankind has been messing about in airplanes for almost 120-years. In that time, thousands of aircraft representing i>[...]

ANN's Daily Aero-Term (07.01.25): Advanced Air Mobility (AAM)

Advanced Air Mobility (AAM) A transportation system that transports people and property by air between two points in the NAS using aircraft with advanced technologies, including el>[...]

ANN's Daily Aero-Linx (07.01.25)

Aero Linx: MQ-1B Predator The MQ-1B Predator is an armed, multi-mission, medium-altitude, long-endurance remotely piloted aircraft that is employed primarily as an intelligence-col>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC