NTSB Prelim Issued on BJ Schramm's Accident | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Sat, May 29, 2004

NTSB Prelim Issued on BJ Schramm's Accident

Few Clues As To What Claimed Industry Legend

NTSB Identification: SEA04LA074
14 CFR Part 91: General Aviation
Accident occurred Tuesday, April 27, 2004 in Montour, ID
Aircraft: Schramm Helicycle, registration: N3275Q
Injuries: 1 Fatal.

This is preliminary information, subject to change, and may contain errors. Any errors in this report will be corrected when the final report has been completed.

On April 27, 2004, approximately 1500 mountain daylight time, a Schramm Helicycle experimental/homebuilt helicopter, N3275Q, was destroyed after impacting terrain near Montour, Idaho. The aircraft was registered to and operated by a private individual. The private pilot, sole occupant of the aircraft, was fatally injured. Visual meteorological conditions prevailed for the 14 CFR Part 91 personal flight, and a flight plan was not filed. The flight departed Montour at an undetermined time.

According to an FAA inspector, an alert notification (ALNOT) was issued for the aircraft approximately 1900 on April 27th. According to local law enforcement personnel, at 0819 on the morning of April 28th the aircraft was located by search and rescue personnel partially submerged in the Payette River about 1 mile northwest of Montour, Idaho. It was also reported by the inspector that prior to the accident a complaint had been reported to local authorities of two helicopters flying low over a school and residential areas in the Montour area. The inspector also reported that prior to the accident the pilot had landed at a local store in Montour and purchased some fuel for the aircraft. The store employee reported that the pilot complained about a problem with the fuel system, and that when the pilot started the engine he noticed a flame/torch during the starting sequence. Under the supervision of the inspector, the aircraft was recovered to a private facility for future examination.

According to the inspector, both main rotor blades were bent upward with minimal deformation and remained attached to the main rotor mast. The tail rotor drive shaft and both tail rotor blades were not located.

FMI: www.ntsb.gov/ntsb/brief.asp?ev_id=20040505X00557&key=1

Advertisement

More News

Aero-News: Quote of the Day (05.09.24)

"Fly-by-wire flight, coupled with additional capability that are being integrated into ALFA, provide a great foundation for Bell to expand on its autonomous capabilities. This airc>[...]

ANN's Daily Aero-Term (05.09.24): Hold Procedure

Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]

ANN's Daily Aero-Linx (05.09.24)

Aero Linx: B-21 Raider The B-21 Raider will be a dual-capable penetrating strike stealth bomber capable of delivering both conventional and nuclear munitions. The B-21 will form th>[...]

Airborne 05.03.24: Advanced Powerplant Solutions, PRA Runway Woes, Drone Racing

Also: Virgin Galactic, B-29 Doc to Allentown, Erickson Fire-Fighters Bought, FAA Reauthorization After dealing with a big letdown after the unexpected decision by Skyreach to disco>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC