FAA Issues SAIB For Ercoupe Elevator Controls | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-SpecialEpisode-12.15.25

AirborneNextGen-
12.16.25

Airborne-Unlimited-12.10.25

Airborne-AffordableFlyers-12.11.25

AirborneUnlimited-12.12.25

AFE 2025 LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Fri, Mar 22, 2013

FAA Issues SAIB For Ercoupe Elevator Controls

Problem Found During Restoration Of An Ercoupe 415-C

The FAA has issued a Special Airworthiness Information Bulletin concerning elevator controls in Ercoupe 415 model airplanes. The FAA received a field report of a loose elevator horn on an Ercoupe 415-C during restoration of the airplane. Although the external appearance of the elevator was unremarkable, teardown of the elevator revealed the elevator horn attach bracket had only one secure fastener out of four as a result of severe corrosion where the steel elevator control horn attached to the aluminum lateral stiffener. Investigation indicated dissimilar metals (steel attached to aluminum), and the corrosion prevention means of this vintage, were the primary cause of the corrosion. Similar undetected corrosion could occur on other airplanes of this type featuring elevators with a continuous compared to the split-type) trailing edge.

Later model Ercoupe series airplanes using an aluminum (not steel) elevator control horn in conjunction with the split-type trailing edge are not subject to this SAIB. As originally designed, this area of the elevator has no adequate means of internal inspection. Univair Aircraft Corporation has issued Service Bulletin No. 34, dated January 4, 2013, to address this limitation and minimize the potential of corrosion going undetected before it exceeds 25 percent of the cross sectional area. The service bulletin adds two round holes (aft of the aluminum elevator stiffener) and one trapezoidal hole (forward of the stiffener) to provide inspection access through the lower elevator skin.

The FAA recommends that all owners and operators of the Univair airplanes identified in the introduction of this SAIB comply with Univair Aircraft Corporation Service Bulletin No. 34, dated January 4, 2013. If corrosion is found upon compliance with this service bulletin or during subsequent inspections, the FAA recommends it be reported it to the FAA.

(Ercoupe 415-C image from file released to Public Domain)

FMI: Send a Reporthttp://univairparts.com

Advertisement

More News

Aero-News: Quote of the Day (12.18.25)

“These new aircraft strengthen our ability to respond quickly, train effectively and support communities nationwide. Textron Aviation has been a steadfast supporter in helpin>[...]

Classic Aero-TV: Viking Twin Otter 400--Bringing the DHC-6 Back Into Production

From 2011 (YouTube Edition): Rugged, Legendary, STOL Twin Makes A Comeback The de Havilland Twin Otter is an airplane with a long history, and it gained a reputation as a workhorse>[...]

NTSB Final Report: Rans Employee Flying Club Rans S-6ES Coyote II

A Wind Gust Lifted The Right Wing And The Airplane Turned To The Left Analysis: The pilot was departing from a 2,395-ft-long by 50-ft-wide turf runway. The pilot reported that afte>[...]

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

ANN's Daily Aero-Term (12.18.25): Braking Action Advisories

Braking Action Advisories When tower controllers receive runway braking action reports which include the terms “medium," “poor," or “nil," or whenever weather con>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC