Ya Gotta See This... Rockwell Collins Autonomous Damage Control System | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-09.09.24

Airborne-NextGen-09.10.24

Airborne-Unlimited-09.11.24

Airborne-AffordableFlyers-09.12.24

Airborne-Unlimited-09.13.24

Tue, May 05, 2009

Ya Gotta See This... Rockwell Collins Autonomous Damage Control System

Rockwell Collins Earns New Damage Tolerance Contract From DARPA

Rockwell Collins has just picked up the third phase of a damage tolerance contract by the Defense Advanced Research Projects Agency (DARPA). Under the contract, Rockwell Collins will demonstrate completely autonomous takeoff, recovery from extreme damage and failure, and autonomous landing of an unmanned subscale F/A-18. Additional flight tests will be conducted on an operational Unmanned Aircraft System (UAS).

Over the course of approximately 15 months, Rockwell Collins will demonstrate its full Damage Tolerance and advanced controls capabilities.

Flight tests will demonstrate increasing damage to both the subscale F/A-18 and an operational UAS, including the failure of control surfaces and parts of the wing, as well as loss of vertical and horizontal tail surfaces. The flight tests will also include an "engine-out" condition followed by automatic adaptive recovery and emergency autoland.

"In addition to demonstrating increased reliability of unmanned aircraft, the damage tolerance work we are doing with DARPA goes a long way in facilitating evolving applications for UAS and the safe coexistence of manned and unmanned aircraft in common airspace," said Dr. David Vos, Senior Director of Control Technologies for Rockwell Collins. "Unmanned aircraft reliability in the battlespace will ensure that U.S. and Allied forces receive real-time high quality Intelligence, Surveillance and Reconnaissance (ISR) data."

"This next phase of the Damage Tolerance program will demonstrate that technology exists to reliably control UAS operating under the most challenging conditions such as extreme damage, upset or failure," said DARPA Program Manager James McCormick.

Damage Tolerance Phase III follows Phases I and II, which were completed in April 2008. In Phase II, the technology demonstrated an aircraft could survive catastrophic wing damage, recover its baseline performance, and safely land - all autonomously.

The final flight test for Phase II, was an eye opener in that 60 percent of a wing was ejected and the adaptive controls were turned off and on -- successfully.

FMI: www.rockwellcollins.com

Advertisement

More News

Historic Community Airport Faces Demolition

Buyer Intends to Turn the Space Into Office Buildings Monroe’s First Air Field (W16), a 36-acre property housing six large hangars and a well-loved runway, has been a centerp>[...]

Klyde Morris (09.16.24)

At Least Klyde's Not On Strike... FMI: www.klydemorris.com>[...]

ANN's Daily Aero-Term (09.13.24): Jamming

Jamming Denotes emissions that do not mimic Global Navigation Satellite System (GNSS) signals (e.g., GPS and WAAS), but rather interfere with the civil receiver's ability to acquir>[...]

ANN's Daily Aero-Linx (09.13.24)

Aero Linx: International Association of Missionary Aviation International Association of Missionary Aviation (IAMA) is comprised of individuals, schools and ministry organizations.>[...]

Airborne 09.11.24: GA Sales Report, Teeny New DJI Drone, Polaris Dawn Launches

Also: KSM Food Truck Fly-In, 1700th ATR, Sportys' Updates, 'Fund an Angel' The General Aviation Manufacturers Association issued the Second Quarter 2024 General Aviation Aircraft S>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC