Tecnam Installs Lycoming iE2s On P2012 Traveller | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Sat, Nov 28, 2015

Tecnam Installs Lycoming iE2s On P2012 Traveller

Roll Out Of The New Airplane Slated For February 2016

Two Integrated Electronic Engines (iE2) built by Lycoming Engines have been successfully installed on Tecnam's P2012 Traveller test aircraft. Roll-out of this next generation, 11-seats, twin piston engine aircraft is due in February 2016, and its first flight is scheduled for June 2016.

Lycoming’s iE2 engine is the company’s flagship technology.  It is an engine and engine control concept designed from the ground up to be electronically controlled.  The iE2 system features a continuously optimizing multi-port fuel injection system for optimum power and fuel consumption performance. The electronically controlled system enables operators to realize reduced maintenance costs and increased availability while simultaneously reducing pilot workload.  Added to this is the ability of the engine control unit to continuously monitor and report engine performance.

Tecnam has selected a single turbo, non-intercooled configuration of the iE2, designated the TEO-540-C1A. “This configuration provides the P2012 Traveller with the power, durability and efficiency necessary for our first intended use as a passenger airplane,” stated Paolo Pascale, Tecnam Managing Director. “We are pleased with the partnership that has been built between Lycoming and Tecnam to move this project forward,” Pascale said.

“Lycoming’s iE2 was a great fit for Tecnam of Italy’s P2012 application. The selection of iE2 not only assists the P2012 in meeting its performance objectives, but should also prove to be an easier engine to integrate into a modern aircraft. We look forward to supporting Tecnam in bringing the airplane to market,” stated Michael Kraft, Senior Vice President and General Manager of Lycoming Engines.

The Lycoming-powered Tecnam P2012 Traveller is designed to comply with both FAR part 23 and EASA CS-23. The aircraft is currently undergoing extensive testing of its fuselage, wings and empennages.

(Top image provided with Tecnam news release. Lower image from file)

FMI: www.tecnam.com

Advertisement

More News

ANN's Daily Aero-Linx (06.29.25)

Aero Linx: Transport Canada We are a federal institution, leading the Transport Canada portfolio and working with our partners. Transport Canada is responsible for transportation p>[...]

ANN's Daily Aero-Term (06.29.25): Gross Navigation Error (GNE)

Gross Navigation Error (GNE) A lateral deviation from a cleared track, normally in excess of 25 Nautical Miles (NM). More stringent standards (for example, 10NM in some parts of th>[...]

Classic Aero-TV: Anticipating Futurespace - Blue Origin Visits Airventure 2017

From AirVenture 2017 (YouTube Edition): Flight-Proven Booster On Display At AirVenture… EAA AirVenture Oshkosh is known primarily as a celebration of experimental and amateu>[...]

NTSB Final Report: Cirrus SR22

Aircraft Parachute System (CAPS) Was Deployed About 293 Ft Above Ground Level, Which Was Too Low To Allow For Full Deployment Of The Parachute System Analysis: The day before the a>[...]

Airborne Affordable Flyers 06.26.25: PA18 Upgrades, ‘Delta Force’, Rhinebeck

Also: 48th Annual Air Race Classic, Hot Air Balloon Fire, FAA v Banning 100LL, Complete Remote Pilot The news Piper PA-18 Super Cub owners have been waiting for has finally arrived>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC