AD NUMBER: 2009-12-02

MANUFACTURER: Airbus Model A300 Airplanes; Model A300 B4-601, B4-603, B4-620, B4-622, B4-605R, B4-622R, F4-605R, F4-622R, and C4-605R Variant F Airplanes (Collectively Called A300-600 Series Airplanes); and Model A310 Airplanes
SUBJECT: Airworthiness Directive 2009-12-02

SUMMARY: The FAA is superseding an existing airworthiness directive (AD), which applies to the airplanes identified above. That AD currently requires revising the FAA-approved maintenance program to include a new airplane maintenance manual task that specifies a detailed inspection after each ram air turbine (RAT) retraction. That existing AD also currently requires, for certain airplanes, a one-time inspection to detect breaks in the bottom flange fitting of the RAT and corrective actions, if necessary; for certain airplanes, an adjustment of the ejection jack; and, for certain other airplanes, replacement of the aluminum part with an improved steel part. This AD also continues to require certain actions for additional airplanes and revising the FAA-approved maintenance program to include procedures for replacing the RAT swivel coupling fork fitting with a new steel part only. This AD results from a report that an additional swivel coupling of the RAT yoke fitting was found cracked during the accomplishment of the requirements of the existing AD. We are issuing this AD to prevent misrigging of the ejection jack of the RAT and to ensure removal of any RAT yoke fitting made from aluminum material. Such conditions could result in a broken or cracked swivel coupling and consequent failure of the RAT yoke fitting, which could result in the loss of RAT function and possible loss of critical flight control systems in the event of certain emergency situations.

FMI: http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgAD.nsf/0/310445E945CBB8AF862575DA00505292?OpenDocument