Wed, Jun 19, 2013
Sets Standard Methodology For Evaluation, Describes Selection And Orientation Of Team Members
The FAA has published an order revising the Amateur-Built Aircraft National Kit Evaluation Team (NKET), defining policy and procedures and establishes a standard methodology to evaluate amateur-built aircraft kits. It also describes the selection and orientation of team members, the process for requesting an aircraft kit evaluation, the conduct of evaluations, and reporting and records maintenance requirements.

The FAA says the goal of the NKET is to ensure that amateur-built aircraft kit evaluations are performed in accordance with national policy. The purpose of the kit evaluation is to determine if an aircraft kit allows an amateur builder to meet the major portion requirement of Title 14, Code of Federal Regulations, part 21, Certification Procedures for Products and Parts, 21.191(g).
The order describes the use of the NKET when evaluating an amateur-built aircraft kit at the kit manufacturer's facility or place of distribution for the following purposes:
- The evaluation of newly developed kits.
- The reevaluation of previously evaluated kits with design changes (derivative kits) that may affect the fabrication and/or assembly percentage totals of the amateur builder.
- The reevaluation of previously evaluated kits that the FAA determined(s) may not meet the major portion requirement of Title 14 of the Code of Federal Regulations (14 CFR) part 21, Certification Procedures for Products and Parts, 21.191(g).
The revision makes minor content changes to the order to transfer responsibility for managing the NKET program to the FAA's Small Airplane Directorate (ACE-100).
ACE-100 is responsible for the overall management and conduct of the NKET. The Aircraft Certification Service' Production and Airworthiness Division (AIR-200) is responsible for updating the FAA Amateur-Built Aircraft Kits web page including the Revised Listing of Amateur-Built Aircraft Kits, the Amateur-Built Kits Checklists and Eligibility Letters, and the Amateur-Built Fabrication and Assembly Checklists for use by the NKET and the flying public.
Manufacturers may submit a request for an aircraft kit evaluation for many reasons, including those found in chapter 1, paragraph 1 of this order. A request for reevaluation is not required for new owners of companies that produce a kit(s) previously evaluated and currently posted to the Revised Listing of Amateur-Built Aircraft Kits located on the FAA website. The NKET will consider requests for a kit evaluation only from manufacturers of amateur-built aircraft kits. Requests from kit distributors or dealers are not accepted.
More News
Aero Linx: Transport Canada We are a federal institution, leading the Transport Canada portfolio and working with our partners. Transport Canada is responsible for transportation p>[...]
Gross Navigation Error (GNE) A lateral deviation from a cleared track, normally in excess of 25 Nautical Miles (NM). More stringent standards (for example, 10NM in some parts of th>[...]
From AirVenture 2017 (YouTube Edition): Flight-Proven Booster On Display At AirVenture… EAA AirVenture Oshkosh is known primarily as a celebration of experimental and amateu>[...]
Aircraft Parachute System (CAPS) Was Deployed About 293 Ft Above Ground Level, Which Was Too Low To Allow For Full Deployment Of The Parachute System Analysis: The day before the a>[...]
Also: 48th Annual Air Race Classic, Hot Air Balloon Fire, FAA v Banning 100LL, Complete Remote Pilot The news Piper PA-18 Super Cub owners have been waiting for has finally arrived>[...]