AD: Robinson | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Sat, Jun 18, 2011

AD: Robinson

AD NUMBER: 2011-12-10

MANUFACTURER: Robinson Helicopter Company Model (Robinson) R22, R22 Alpha, R22 Beta, R22 Mariner, R44, and R44 II Helicopters
SUBJECT: Airworthiness Directive 2011-12-10

SUMMARY: This amendment supersedes an existing airworthiness directive (AD) for the specified Robinson model helicopters that currently requires a visual inspection for skin separation along the leading edge of blade skin aft of the skin-to-spar bond line on the lower surface of each main rotor blade (blade) and in the tip cap area.

The existing AD also requires a 'tap test' for detecting a separation or void in both bonded areas and repainting any exposed area of the blades. If any separation or void is detected, the AD requires, before further flight, replacing the blade. Thereafter, before each flight, the existing AD also requires checking for any exposed (bare) metal along the skin-to-spar bond line on the lower surface of each blade near the tip. If any bare metal is found, that AD requires an inspection by a qualified mechanic.

This amendment contains the same requirements but expands the applicability to include all serial-numbered model helicopters and limits the applicability to specific blade part numbers. This amendment also requires a repetitive inspection of the blade and any necessary rework. This amendment is prompted by a fatal accident in Israel. The FAA has also included responses to comments objecting to the recording requirements in the current AD relating to the pilot checks before each flight and to comments that the burden of the before-each-flight pilot check exceeds the benefit. It has concluded that a check before the first flight of each day is sufficient for aviation safety. The actions specified by this AD are intended to provide more specific AD actions, to relieve the burdens associated with the before-each-flight check by changing it to a daily check, to detect blade skin debond, and to prevent blade failure and subsequent loss of control of the helicopter.

FMI: http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgAD.nsf/0/7950DFF2185691FA862578B2004D6912?OpenDocument

Advertisement

More News

ANN's Daily Aero-Linx (06.29.25)

Aero Linx: Transport Canada We are a federal institution, leading the Transport Canada portfolio and working with our partners. Transport Canada is responsible for transportation p>[...]

ANN's Daily Aero-Term (06.29.25): Gross Navigation Error (GNE)

Gross Navigation Error (GNE) A lateral deviation from a cleared track, normally in excess of 25 Nautical Miles (NM). More stringent standards (for example, 10NM in some parts of th>[...]

Classic Aero-TV: Anticipating Futurespace - Blue Origin Visits Airventure 2017

From AirVenture 2017 (YouTube Edition): Flight-Proven Booster On Display At AirVenture… EAA AirVenture Oshkosh is known primarily as a celebration of experimental and amateu>[...]

NTSB Final Report: Cirrus SR22

Aircraft Parachute System (CAPS) Was Deployed About 293 Ft Above Ground Level, Which Was Too Low To Allow For Full Deployment Of The Parachute System Analysis: The day before the a>[...]

Airborne Affordable Flyers 06.26.25: PA18 Upgrades, ‘Delta Force’, Rhinebeck

Also: 48th Annual Air Race Classic, Hot Air Balloon Fire, FAA v Banning 100LL, Complete Remote Pilot The news Piper PA-18 Super Cub owners have been waiting for has finally arrived>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC