AD: Revo | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Fri, Jun 10, 2005

AD: Revo

AD NUMBER: 2005-12-02
MANUFACTURER:
Revo Incorporated
SUBJECT: Airworthiness Directive 2005-12-02
SUMMARY: The FAA is adopting a new airworthiness directive (AD) to supersede Airworthiness Directive (AD) 98-10-12, which applies to all Revo, Incorporated (REVO) (Type Certificate 1A13 formerly held by Colonial Aircraft Company, Lake Aircraft Corporation, Consolidated Aeronautics, Inc., and Global Amphibians LLC) Models Colonial C-2, Lake LA-4, Lake LA-4A, Lake LA-4P, and Lake LA-4-200 airplanes. AD 98-10-12 currently requires you to ensure adequate clearance between the attachment fitting and the horizontal stabilizer rear beam and between the attachment fitting and the stabilizer skin with inspections, possible replacement, and adjustments as necessary.

This new AD is the result of several reports of fatigue cracks found in the horizontal stabilizer attachment fitting (part number 2-2200-21) of Model LA-4-200 airplanes that were in compliance with AD 98-10-12. This includes an airplane accident with a fatality attributed to a fatigue crack in the horizontal stabilizer attachment fitting. Consequently, this AD requires either a dye penetrant inspection of the horizontal stabilizer attachment fitting for any evidence of fretting, cracking, or corrosion (with necessary replacement and modification) or replacement of the fittings depending on the number of operational hours on the fitting. The AD also requires you to repetitively replace the fitting every 850 hours time-in-service (TIS), repetitively inspect (visually) the fittings between replacement times, and report to FAA the results of the initial inspection and any cracks found on repetitive inspections. We are issuing this AD to detect, correct, and prevent future cracks in the horizontal stabilizer attachment fitting, which could result in failure of the horizontal stabilizer attachment fitting. This failure could result in loss of control of the airplane.

FMI: www.avantext.com/DailyADIndex.ASP?AD=20051202

Advertisement

More News

Airborne 07.02.25: TikToker Arrested, Vietnam A/L Ground Hit, ATC Modernization

Also: Outlaw Prop 4 Mooney, Ready 4 Duty, Ukrainian F-16 Pilot Lost, Blue Origin Flt On his journey to become the first pilot to land solo on all seven continents, 19-year-old Etha>[...]

Airborne Affordable Flyers 07.03.25: Sonex HW, BlackShape Gabriel, PRA Fly-In 25

Also: DarkAero Update, Electric Aircraft Symposium, Updated Instructor Guide, OSH Homebuilts Celebrate The long-awaited Sonex High Wing prototype has flown... the Sonex gang tells >[...]

ANN's Daily Aero-Term (07.07.25): Discrete Code

Discrete Code As used in the Air Traffic Control Radar Beacon System (ATCRBS), any one of the 4096 selectable Mode 3/A aircraft transponder codes except those ending in zero zero; >[...]

Classic Aero-TV: DeltaHawk Aero Engine Defies Convention

From 2023 (YouTube Edition): Deviation from the Historical Mean Racine, Wisconsin-based DeltaHawk is a privately-held manufacturer of reciprocating engines for aircraft and hybrid >[...]

ANN's Daily Aero-Linx (07.07.25)

Aero Linx: Formation and Safety Team (F.A.S.T.), USA The Formation and Safety Team (FAST) is a worldwide, educational organization dedicated to teaching safe formation flying in Wa>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC