NTSB Issues Prelim In Accident That Fatally Injured Two Utility Workers | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Wed, Aug 21, 2013

NTSB Issues Prelim In Accident That Fatally Injured Two Utility Workers

Helicopter Long Line Was Hoisting Two Workers When It Severed

The NTSB has released a preliminary report from an accident involving a Hughes 369D helicopter that fatally injured two utility workers employed by Wind Energy Transmission of Texas.

According to the report, on August 5, 2013, at 0915 central daylight time, a Hughes model 369D helicopter, N8688F, was not damaged when its external cargo long-line was severed after colliding with a shield wire suspended between power transmission towers near Ackerly, Texas. The two linemen who were being hoisted on the long-line were fatally injured after falling about 200 feet to the ground after the collision. The helicopter was registered to and operated by Haverfield Aviation Inc., under the provisions of 14 Code of Federal Regulations Part 133 as an external load flight, without a flight plan. Day visual meteorological conditions prevailed for the local flight, which was operating from a landing zone situated near the accident site.

According to the operator, the helicopter was equipped with a 100-foot long external cargo long-line that was being used to hoist linemen onto power transmission towers. Shortly after departure, as the helicopter was climbing toward the transmission tower, the long-line collided with a shield wire suspended between transmission towers. The operator reported that the long-line severed about 5 feet above the linemen. The pilot returned to the landing zone and made an uneventful landing. The pilot did not report any malfunction or failures with the helicopter that would have prevented normal operation.

The nearest aviation weather reporting station was located at Big Spring McMahon-Wrinkle Airport (KBPG), Big Spring, Texas, about 20 miles southeast of the accident site. At 0915, the KBPG automated surface observing system reported: wind from 160 degrees at 11 knots, visibility 10 miles, sky clear, temperature 28 degrees Celsius, dew point 16 degrees Celsius, and an altimeter setting of 30.10 inches of mercury.

(Similar helicopter pictured in file photo. Not accident aircraft)

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Linx (06.29.25)

Aero Linx: Transport Canada We are a federal institution, leading the Transport Canada portfolio and working with our partners. Transport Canada is responsible for transportation p>[...]

ANN's Daily Aero-Term (06.29.25): Gross Navigation Error (GNE)

Gross Navigation Error (GNE) A lateral deviation from a cleared track, normally in excess of 25 Nautical Miles (NM). More stringent standards (for example, 10NM in some parts of th>[...]

Classic Aero-TV: Anticipating Futurespace - Blue Origin Visits Airventure 2017

From AirVenture 2017 (YouTube Edition): Flight-Proven Booster On Display At AirVenture… EAA AirVenture Oshkosh is known primarily as a celebration of experimental and amateu>[...]

NTSB Final Report: Cirrus SR22

Aircraft Parachute System (CAPS) Was Deployed About 293 Ft Above Ground Level, Which Was Too Low To Allow For Full Deployment Of The Parachute System Analysis: The day before the a>[...]

Airborne Affordable Flyers 06.26.25: PA18 Upgrades, ‘Delta Force’, Rhinebeck

Also: 48th Annual Air Race Classic, Hot Air Balloon Fire, FAA v Banning 100LL, Complete Remote Pilot The news Piper PA-18 Super Cub owners have been waiting for has finally arrived>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC