FAA Addresses Multi-Switching Problem During Medical Examination | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.14.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Tue, Apr 01, 2014

FAA Addresses Multi-Switching Problem During Medical Examination

A Fat Finger Could Keep You Grounded

ANN April 1 Special Edition

As airliners have become equipped with more and more press switch devices a problem has been recognized called multi-switching. Multi-switching is when a pilot accidentally presses more than one switch when attempting to complete a system function. After concluding a five-year, multi-million-dollar study of  the problem, the FAA determined the primary cause of multi-switching is an oversized index finger.

An old joke floating around in the 1970s was that because of the proliferation of press-switches in the airline cockpit, Darwin’s theory of evolution dictated that airline pilots would evolve to become all ass and index finger. While the FAA had concluded years prior to the multi-switching problem that all airline pilots are already asses, they now intend to address the index finger by setting a maximum index finger circumference to be measured during an FAA first class medical exam.

The limiting circumference of the index finger has been determined to be 70 mm measured at the center of the finger-nail. This will be determined by placing an FAA approved “Index Finger Test Cup” over the finger; this procedure will be known as the multi-switch finger wave. If the pilot’s index finger exceeds the 70 mm measurement, further testing is required to assure the pilot can demonstrate press-switch accuracy. This will be performed on a keypad with press switches that randomly illuminate for a thirty second time period. The applicant must respond by pressing the randomly illuminated switches with an accuracy rate of no less than 70%.

The multi-switch finger wave test requirement becomes effective April 1, 2015.

FMI: www.faa.gov

Advertisement

More News

ANN's Daily Aero-Term (05.17.24): Very High Frequency

Very High Frequency The frequency band between 30 and 300 MHz. Portions of this band, 108 to 118 MHz, are used for certain NAVAIDs; 118 to 136 MHz are used for civil air/ground voi>[...]

ANN's Daily Aero-Linx (05.17.24)

Aero Linx: Aviation Suppliers Association Established February 25, 1993, the Aviation Suppliers Association (ASA), based in Washington, D.C., is a not-for-profit association, repre>[...]

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Classic Aero-TV: ANN Visits Wings Over The Rockies Exploration Of Flight

From 2021 (YouTube Version): Colorado Campus Offers aVariety Of Aerospace Entertainment And Education Wings over the Rockies Exploration of Flight is the second location for the Wi>[...]

Airborne Affordable Flyers 05.16.24: PRA Runway, Wag-Aero Sold, Young Eagles

Also: Paramotor Champ's, Electric Ultralight, ICON BK Update, Burt Rutan at Oshkosh! The Popular Rotorcraft Association is reaching out for help in rebuilding their private runway >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC