What To Do About Pelton? | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-09.15.25

AirborneNextGen-
09.09.25

Airborne-Unlimited-09.10.25

Airborne-AffordableFlyers-09.11.25

AirborneUnlimited-09.12.25

Fri, Nov 12, 2004

What To Do About Pelton?

Ethics Expert: "There's Really Only One Alternative"

By ANN Senior Editor Pete Combs

Jack Pelton is in a pickle. Outed by CBS Wednesday night as having obtained both his bachelor of science degree and his masters in aeronautical engineering from a Wyoming-based diploma mill, the Cessna CEO must "acknowledge that he's deceived his company and his co-workers and admit that he may have unfairly moved up the ladder."

So says Dr. Brian Schrag, executive secretary of the Association for Practical and Professional Ethics at the University of Indiana. "Really," he said, "there's only one alternative."

The CBS "60 Minutes" story mentioned Pelton in passing, noting that he got both degrees from a university that really doesn't exist -- except on the internet.

Industry reaction was muted.

"It doesn't affect the safety of the aircraft our members fly," said AOPA spokesman Chris Dancey.

"There are a lot of things I want to say, but I better check with my boss first," said one official at the Wichita local of the Machinists Union.

But behind the scenes, almost under their breath, a lot of industry leaders and even Cessna workers said it will be a minor miracle if Pelton remains at the Cessna helm.

Postings on a Textron message board were less subtle. "[Pelton] was hired under the assumption that his engineering degrees were accredited," said one posting. Should we all buy our degrees? If so there is going to be alot of burning holes in the ground."

"One issue is, can he continue to command the respect of his employees?" said ethicist Schrag. "I think the ethical thing to do would be to resign. His board of directors can decide whether to accept it, but he has to step forward."

"Why?" asked another post on the Textron message board. "He is one of the better leaders here at Cessna. So he bought a degree, I think most degrees are overrated anyway."

But that opinion was in the minority. "This is unacceptable," said another. "Jack should do the right thing and step down."

ANN Reader input is split down the middle... between those who see Pelton as an effective leader who should "gut it out," and those who think he should resign.

FMI: www.cessna.com

Advertisement

More News

NTSB Final Report: Evektor-Aerotechnik A S Harmony LSA

Improper Installation Of The Fuel Line That Connected The Fuel Pump To The Four-Way Distributor Analysis: The airplane was on the final leg of a flight to reposition it to its home>[...]

ANN's Daily Aero-Term (09.15.25): Decision Altitude (DA)

Decision Altitude (DA) A specified altitude (mean sea level (MSL)) on an instrument approach procedure (ILS, GLS, vertically guided RNAV) at which the pilot must decide whether to >[...]

Aero-News: Quote of the Day (09.15.25)

“With the arrival of the second B-21 Raider, our flight test campaign gains substantial momentum. We can now expedite critical evaluations of mission systems and weapons capa>[...]

Airborne 09.12.25: Bristell Cert, Jetson ONE Delivery, GAMA Sales Report

Also: Potential Mars Biosignature, Boeing August Deliveries, JetBlue Retires Final E190, Av Safety Awareness Czech plane maker Bristell was awarded its first FAA Type Certification>[...]

Airborne 09.10.25: 1000 Hr B29 Pilot, Airplane Pile-Up, Haitian Restrictions

Also: Commercial A/C Certification, GMR Adds More Bell 429s, Helo Denial, John “Lucky” Luckadoo Flies West CAF’s Col. Mark Novak has accumulated more than 1,000 f>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC