Mon, Jul 24, 2006
Aero-Tips!
A good pilot is always learning -- how many times have you
heard this old standard throughout your flying career? There is no
truer statement in all of flying (well, with the possible exception
of "there are no old, bold pilots.")
Aero-News has called upon the expertise of Thomas P. Turner,
master CFI and all-around-good-guy, to bring our readers -- and us
-- daily tips to improve our skills as aviators. Some of them, you
may have heard before... but for each of us, there will also be
something we might never have considered before, or something that
didn't "stick" the way it should have the first time we memorized
it for the practical test.
Look for our daily Aero-Tips segments, coming each day to
you through the Aero-News Network.
Aero-Tips 07.24.06
One very helpful workload-reduction tool I employ in flight is
what I call the Altitude Critical Area, or
ACA. The idea for the ACA comes from the airline industry and most
notably author Robert Sumwalt, who coined the term to describe the
final portion of an instrument approach. I've adopted the term but
expanded on the concept greatly in teaching single-pilot resource
management (SPRM).
An Altitude Critical Area is any range of altitude --
- within 1000 feet of the ground, and/or
- within 1000 feet of a level-off altitude (whether on climb or
descent) until established and trimmed on that altitude.
The idea is to reduce workload by limiting nonessential tasks
when in an ACA. Don't be calling ahead to the FBO for a fuel load
or a rental car when flying in an ACA. Avoid pulling out charts or
briefing yourself for an approach or programming the GPS when in an
ACA. In almost all cases these sorts of tasks can wait until you're
established and trimmed on level flight, or you land or fly out of
an ACA. Evoke a "sterile cockpit" when inside
an ACA, after first briefing your passengers on what a sterile
cockpit means, and how and when you'll declare sterile cockpit
rules to be effective on board your aircraft.
Pilot workload is high enough on takeoff, on approach and
landing, and during intermediate and final level-offs without
adding the distractions of passenger conversation and extraneous,
non-time-sensitive tasks.
Aero-tip of the day: VFR or IFR, observe
Altitude Critical Areas to reduce workload and increase safety.
More News
"To advance autonomous flight systems, our focus remains on automating pilot skills that enhance efficiency but most importantly, prioritize safety at every stage. Progressing thes>[...]
Aero Linx: MC-12W Liberty The MC-12W is a medium-to low-altitude, twin-engine turboprop aircraft. Its primary mission is providing intelligence, surveillance and reconnaissance sup>[...]
Airport Taxi Charts Designed to expedite the efficient and safe flow of ground traffic at an airport. These charts are identified by the official airport name; e.g., Ronald Reagan >[...]
Pilot’s Failure To Engage The Turbocharger For Takeoff And His Improper Decision To Continue The Takeoff... Analysis: The owner recently purchased the experimental amateur-bu>[...]
Also: NATA CEO In Legal Dilemma, WestJet Encore Settle, Drone Bill H.R. 8416, USN Jet Trainer GAMA released their 1Q/24 GA Aircraft Shipment and Billing Report -- with mostly mixed>[...]