Sierra FJ44 Super II And Super S-II Gain Canadian STC Approval | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-11.17.25

AirborneNextGen-
11.11.25

Airborne-Unlimited-11.12.25

Airborne-FltTraining-11.13.25

AirborneUnlimited-11.14.25

LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Fri, Nov 20, 2009

Sierra FJ44 Super II And Super S-II Gain Canadian STC Approval

Re-Engining Mods Now Approved In More Than 33 Countries

Canada’s Department of Transport has amended STC approval number SA06-54 for Sierra Industries, adding the Citation 550 and S550 models to their existing Williams FJ44 engine upgrades for Cessna Citation 500 and 501 aircraft. Since the initial 2002 certification, Sierra’s FJ44 modifications have been applied to 54 aircraft. The high-performance fleet of Citation I, II and S-II aircraft have amassed a total of more than 50,000 hours of Williams engine operation to date.

Williams International’s 3rd-generation engine technology increases efficiency, reducing fuel burn, operating cost and carbon emissions. Since the 2002 introduction of the FJ44 Eagle II, Sierra’s FJ44 fleet has reduced worldwide carbon emissions by an estimated 10,000 tons. The aircraft also enjoy substantial performance improvements, ranging from 35 to 50 knot cruise speed increases and 300 to 400 NM greater range to dramatically improved climb performance. In fact, all 4 models can achieve FL430 at gross weight in under 25 minutes from any North American airport, making them ideal candidates for remote Canadian locations and high altitude airfields.

Williams FJ44

Building on Sierra’s 25 years of Citation modification history and 15 years of experience in Citation re-engining, Sierra’s current re-engining lineup includes the highly successful FAA and EASA-approved FJ44-2A Eagle II and Stallion and the FAA-approved FJ44-3A Super II and Super S-II modifications. Supporting these modifications with their extensive in-house manufacturing capabilities, Sierra is among the largest holders of FAA Parts Manufacturing Approvals (PMA) in the southwestern US.

Sierra recently announced new incentives for advance booking of 2010 modifications, reducing their 2009 pricing. FJ44-2A Stallion upgrades start at under $1.55 million and FJ44-3A Super II and Super S-II positions are available starting under $1.75 million. Trade-in allowances are also available on existing Pratt engines with time remaining.

FMI: www.sijet.com

Advertisement

More News

Aero-News: Quote of the Day (11.17.25)

“We achieved full mission success today, and I am so proud of the team. It turns out Never Tell Me The Odds had perfect odds—never before in history has a booster this >[...]

ANN's Daily Aero-Term (11.17.25): NonDirectional Beacon

NonDirectional Beacon An L/MF or UHF radio beacon transmitting nondirectional signals whereby the pilot of an aircraft equipped with direction finding equipment can determine his/h>[...]

NTSB Final Report: Fred L Wellman CH 750 Cruzer

About 5ft Above Ground Level, The Airplane Stalled, And The Left Wing Dropped Analysis: The pilot reported that this flight was conducted as part of phase 1 flight testing of the n>[...]

ANN's Daily Aero-Linx (11.17.25)

Aero Linx: Brodhead Pietenpol Association The Brodhead Pietenpol Association is a newly reorganized (in 2017) non-profit educational corporation that grew and developed from an ear>[...]

Airborne-NextGen 11.11.25: Archer Buys Hawthorne, Joby Conforms, Stranded Astros

Also: VerdeGo Contract, Medi-Carrier, Gambit 6 UCAV, Blade Urban Air Mobility Pilot Archer Aviation has inked a deal for control of Hawthorne Municipal Airport (HHR), also known as>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC