AD Correction: Lycoming | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-10.27.25

AirborneNextGen-
10.28.25

Airborne-Unlimited-10.29.25

Airborne-Unlimited-10.30.25

AirborneUnlimited-10.17.25

Tue, Jun 29, 2004

AD Correction: Lycoming

AD NUMBER: 2004-10-14
MANUFACTURER:
Textron Lycoming (CORRECTION)
SUBJECT: Airworthiness Directive 2004-10-14
SUMMARY: The FAA is adopting a new airworthiness directive (AD) that supersedes an existing AD, for Lycoming Engines (formerly Textron Lycoming), direct-drive reciprocating engines (except O-145, O-320H, O-360E, LO-360E, LTO -360E, O-435, and TIO-541 series engines). That AD currently requires inspection of the crankshaft gear installation and rework or replacement of the gears where necessary after a propeller strike, sudden stop page, at overhaul, or whenever gear train repair is required. This AD requires the same actions but makes the correction that the existing gear retaining bolt and lock plate be removed from service and new hardware installed, and revises the definitions for sudden stoppage and propeller strike. This AD results from a change to the definition of a propeller strike or sudden stoppage. We are issuing this AD to prevent loosening or failure of the crankshaft gear retaining bolt, which may cause sudden engine failure.The FAA is adopting a new airworthiness directive (AD) that supersedes an existing AD, for Lycoming Engines (formerly Textron Lycoming), direct-drive reciprocating engines (except O-145,O-320H, O-360E, LO-360E, LTO -360E, O-435, and TIO-541 series engines). That AD currently requires inspection of the crankshaft gear installation and rework or replacement of the gears where necessary after a propeller strike, sudden stoppage, at overhaul, or whenever gear train repair is required. This AD requires the same actions but makes the correction that the existing gear retaining bolt and lock plate be removed from service and new hardware installed, and revises the definitions for sudden stoppage and propeller strike. This AD results from a change the definition of a propeller strike or sudden stoppage. We are issuing this AD to prevent loosening or failure of the crankshaft gear retaining bolt, which may cause sudden engine failure.

FMI: www.avantext.com/DailyADIndex.ASP?AD=20041014


Advertisement

More News

NTSB Final Report: Dehavilland DHC-2 MK 1

During The Forced Landing, The Airplane’s Float Struts And Spreaderbars Collapsed Analysis: While en route to a remote fishing lodge in a float-equipped airplane, one of the >[...]

Aero-News: Quote of the Day (10.29.25)

"X-59 is a symbol of American ingenuity. The American spirit knows no bounds. It's part of our DNA – the desire to go farther, faster, and even quieter than anyone has ever g>[...]

ANN's Daily Aero-Linx (10.29.25)

Aero Linx: The Honourable Company of Air Pilots The advancement of the public interest by the promotion of safety for all those who are employed in connection with or who travel by>[...]

ANN's Daily Aero-Term (10.30.25): Minimum Friction Level

Minimum Friction Level The friction level specified in AC 150/5320-12, Measurement, Construction, and Maintenance of Skid Resistant Airport Pavement Surfaces, that represents the m>[...]

ANN's Daily Aero-Linx (10.30.25)

Aero Linx: Aerospace Industries Association (AIA) For over 100 years, the American aerospace and defense industry has shaped the world around us. From the first flight to the moon >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC