Sun, Sep 19, 2010
Board Cites Rudder Problems Encountered Before AA Airbus Went
Down
The NTSB recently issued a safety
recommendation to the European Aviation Safety Agency (EASA)
regarding the November 2001 accident involving an American Airlines
Airbus near JFK. Flight 587, which was flying to the Dominican
Republic, went down in the Belle Harbor neighborhood of Queens.
There were no survivors among the 260 passengers and crew, and five
people on the ground were also killed.
The NTSB determined that the probable cause of the accident was
"the in-flight separation of the vertical stabilizer as a result of
the loads beyond ultimate design that were created by the first
officer's unnecessary and excessive rudder pedal inputs.
Contributing to these rudder pedal inputs were characteristics of
the Airbus A300-600 rudder system design and elements of the
American Airlines Advanced Aircraft Maneuvering Program." Flight
587 encountered wake turbulence from a Boeing 747 shortly after
takeoff, and the pilot's steering response created severe strain on
the rudder mechanism. Sounds of likely mechanical failures could be
heard in the recorded data recovered from the plane's wreckage, as
well as the pilots' attempts to right the aircraft.
Soon after its investigation commenced, the NTSB issued a safety
recommendation for updates in training of all pilots of
transport-category airplanes.
The "loads" referenced by the NTSB
are aerodynamic stresses caused by rapid movement of the rudder in
an attempt to combat the aircraft movement caused by the wake of
the nearby Boeing 747. The report, however, also pointed to
"characteristics of the Airbus A300-600 rudder system design and
elements of the American Airlines Advanced Aircraft Maneuvering
Program," as a contributing factor in the crash.
The Accident airplane was built in France, subject to European
regulatory oversight. In its new recommendation, issued on August
4, 2010, the NTSB encourages modification of European certification
standards to ensure safe handling qualities "in the yaw axis
throughout the flight envelope," as well as instituting limits for
the sensitivity of rudder pedals. The yaw axis refers to the axis
about which the aircraft nose and tail moves side-to-side. The
flight envelope refers to the outer boundaries of flight for which
the aircraft is designed.
The NTSB recommendation involves limiting rudder movement so
that the aerodynamic stresses or "loads" do not exceed the design
maximums. The NTSB also suggests review and modification, if
necessary, of all existing models of the Airbus A300-600 and A310
aircraft.
More News
Hazardous Weather Information Summary of significant meteorological information (SIGMET/WS), convective significant meteorological information (convective SIGMET/WST), urgent pilot>[...]
Aero Linx: The T-6 Racing Association The T-6 Racing Association is all about T-6‘s and racing. Our mission is to bring great racing to our fans in Reno and other venues wher>[...]
Also: Electra Aero, AMO-CBP v Smugglers, Naval King Airs, Boeing Deal To the surprise of everyone involved, Waco Kitchen shut down both airport operations with little warning and h>[...]
Also: WACO Kitchen Bails, French SportPlane Mfr to FL, Dynon-Advance Flight Systems, Innovation Preview Bobby Bailey, a bit of a fixture in sport aviation circles for his work with>[...]
Also: Virgin Galactic, B-29 Doc to Allentown, Erickson Fire-Fighters Bought, FAA Reauthorization After dealing with a big letdown after the unexpected decision by Skyreach to disco>[...]