Vans RV-14 Surprised Crowds At Oshkosh | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Fri, Aug 10, 2012

Vans RV-14 Surprised Crowds At Oshkosh

RV-FOURTEEN? Where did that come from? 

Something of a “stealth” project, the RV-14 made its inaugural public appearance at AirVenture a couple of weeks ago. but by the time the public got its first look at the new kit-built plane, it had already completed a comprehensive test program. The RV-14 is an aerobatic two-seat side-by-side airplane with a 46” wide cabin and a 27’ span. The wing uses the RV-10 airfoil and slotted flaps. A new cowling surrounds a Lycoming IO-390 producing 210 hp, but will accept the 200 hp IO-360. (There is NO option for a six cylinder engine.)  Fifty gallons of fuel is housed in two 25 gallon leading edge tanks. Tall seating and low canopy rails result in superb visibility – even better than previous RVs.  A tip-up canopy (the only canopy available) incorporates a slick hydraulic-strut assist and quick-release mechanism that makes it fit perfectly and open/close like a bank vault. A large baggage compartment behind seats can hold up to 100 lbs. The airplane rides on a new leaf spring main gear.

Vans said that the goal was to meet or exceed the performance of a 180 hp/constant-speed RV-7 in an airplane with better comfort, better visibility, longer range and more payload.

Like all other RVs, the RV-14 is built of riveted aluminum. However, the kit incorporates everything Van’s has learned in forty years, so building times should be substantially less than previous kits. All metal parts are completely formed and pre-punched -- even the main longerons. Rivet holes are punched full-size and main spars are assembled at the factory. The canopy bubble will come pre-trimmed. The plans/manual are combined in the style that works so well on RV-10 and RV-12. Complete wiring kits and avionics packages are designed and will be offered as options. A tailwheel RV-14 is in the works.

Wing kits should be available in September. After that, other airframe kits will be released at regular intervals until the complete airplane is available. After its Oshkosh debut, the RV-14 has joined the “demo fleet” at the Van’s Aircraft, Inc. factory in Aurora, Oregon.

FMI: www.vansaircraft.com

Advertisement

More News

ANN's Daily Aero-Term (05.09.24): Hold Procedure

Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]

ANN's Daily Aero-Term (05.06.24): Altitude Readout

Altitude Readout An aircraft’s altitude, transmitted via the Mode C transponder feature, that is visually displayed in 100-foot increments on a radar scope having readout cap>[...]

ANN's Daily Aero-Linx (05.06.24)

Aero Linx: European Hang Gliding and Paragliding Union (EHPU) The general aim of the EHPU is to promote and protect hang gliding and paragliding in Europe. In order to achieve this>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

Aero-News: Quote of the Day (05.07.24)

"The need for innovation at speed and scale is greater than ever. The X-62A VISTA is a crucial platform in our efforts to develop, test and integrate AI, as well as to establish AI>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC