AD: Honeywell International Inc. Turboprop and Turboshaft Engines | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Thu, Jun 28, 2018

AD: Honeywell International Inc. Turboprop and Turboshaft Engines

AD NUMBER: 2018-13-05

PRODUCT: Certain Honeywell International Inc. (Honeywell) TPE331 turboprop and TSE331 turboshaft engines.

ACTION: Final Rule.

SUMMARY: This AD was prompted by recent reports of failures of the direct drive fuel control gears and bearings in the hydraulic torque sensor gear assembly, part number (P/N) 3101726-3.

This AD requires initial and repetitive engine oil filter sampling and analysis of the affected engines and inspections of certain hydraulic torque sensor gear assemblies.

DATES: This AD is effective July 26, 2018.

COST: The FAA estimates that this AD affects 3,831 engines installed on airplanes of U.S. registry. The agency estimates that estimate all engines will require a records review to determine if they have an affected hydraulic torque sensor gear assembly installed. That review is expected to cost $85 for one hour of labor.

The agency estimates that 2,542 engines operating under Parts 121 or 135 and 544 engines operating under Part 91 will be required to perform oil filter sampling and analysis. Those costs are estimated as follows:

  • Oil filter sampling and analysis: Part 91 operators - $1,184 for parts and labor
  • Oil filter sampling and analysis: Part 121 and 135 operators - $296  for parts and labor.

An estimated 242 engines will require that the hydraulic torque sensor gear assembly be overhauled during the first year of inspection at an estimated cost of $10,850 for parts and labor.

An estimated 217 engines will require hydraulic torque sensor gear assembly inspection after an unacceptable oil filter analysis during the first year of inspection at a estimated cost of $3,425 for parts and labor.

FMI: AD

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC