AD: CFM International, S.A. Turbofan Engines | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-11.04.24

Airborne-NextGen-11.05.24

Airborne-Unlimited-10.30.24

Airborne-FlightTraining-10.31.24

Airborne-Unlimited-11.01.24

Mon, May 31, 2021

AD: CFM International, S.A. Turbofan Engines

AD 2021-10-09 Requires Removal, Inspection, And Replacement Of The Affected HPT Inner Stationary Seal

The FAA is adopting a new airworthiness directive (AD) for all CFM International, S.A. (CFM) CFM56-5B and CFM56-7B model turbofan engines with a certain high-pressure turbine (HPT) inner stationary seal installed.

This AD was prompted by cracks found in the rotating air HPT front seal. This AD requires removal, inspection, and replacement of the affected HPT inner stationary seal and, depending on the findings, replacement of the rotating air HPT front seal, HPT rotor blades, and No. 3 ball bearing. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective June 24, 2021.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all CFM CFM56-5B and CFM56-7B model turbofan engines with a certain HPT inner stationary seal installed. The NPRM published in the Federal Register on September 20, 2019 (84 FR 49487). The NPRM was prompted by a report that two cracks were discovered on a CFM CFM56-5B model turbofan engine rotating air HPT front seal during a routine engine shop visit. After investigation, CFM determined that the HPT inner stationary seal, part number 1808M56G01, may not have received the correct braze heat treat cycle at the time of the honeycomb replacement. As a result, the affected HPT inner stationary seal could lead to a localized separation of the replaced honeycomb, which may reduce the life of the rotating air HPT front seal. In the NPRM, the FAA proposed to require removal, inspection, and replacement of the affected HPT inner stationary seal and, depending on the findings, replacement of the rotating air HPT front seal, HPT rotor blades, and No. 3 ball bearing. The FAA is issuing this AD to address the unsafe condition on these products.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Linx (11.03.24)

Aero Linx: Not Plane Jane Airplanes have always been a part of my life. My family was actively involved in aviation, and operated an FBO with sales worldwide for nearly fifty years>[...]

Aero-News: Quote of the Day (11.03.24)

“As a young child, I intently listened to my grandfather’s flying stories including his role in the Berlin Airlift. Colonel Halverson’s legendary exploits, which >[...]

ANN's Daily Aero-Term (11.03.24): Light Gun

Light Gun A handheld directional light signaling device which emits a brilliant narrow beam of white, green, or red light as selected by the tower controller. The color and type of>[...]

Airborne 10.30.24: ArkanSTOL Suspended, Stratolaunch Expands, Artemus III

Also: Boeing To Sell Off Space Biz?, Naval Aviator Honors, Prop Accident, More B-21s? The ArkanSTOL executive team announced that its annual event and competition would be suspende>[...]

Airborne 11.01.24: XB-1 Flies Again, Evektor Fleet Sale, Zepp Record Remembered

Also: Senator Pushes FAA, Gulfstream Goes Starlink, Crew-8 Astro Out of Hospital, PC-12 Flight Hours Boom Supersonic’s XB-1 demonstrator aircraft successfully carried out Fli>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC