NTSB Final Report: Helio HT-295 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.12.25

Airborne-NextGen-05.06.25

AirborneUnlimited-05.07.25

Airborne-AffordableFlyers-05.08.25

AirborneUnlimited-05.09.25

Tue, May 13, 2025

NTSB Final Report: Helio HT-295

(Pilot) Could Not Arrest The Right Turn, And The Airplane Departed The Right Side Of The Runway

Location: Marion, Ohio Accident Number: ERA25LA091
Date & Time: January 5, 2025, 17:00 Local Registration: N18JC
Aircraft: Helio HT-295 Aircraft Damage: Substantial
Defining Event: Sys/Comp malf/fail (non-power) Injuries: 1 None
Flight Conducted Under: Part 91: General aviation - Positioning

Analysis: The pilot reported that, after a normal landing, the pilot heard a “pop” followed by a leaning tendency to the right that he attempted to correct with flight control inputs. He could not arrest the right turn, and the airplane departed the right side of the runway and came to a stop, upright, in the grass. The right wing and right stabilator sustained substantial damage. 

The right main landing gear spring separated during the landing roll. Metallurgical examination of the spring revealed evidence of chloride intergranular stress-corrosion cracking that progressed into fatigue over time. The examination also found evidence of the spring being reworked after manufacture, with grinding marks perpendicular to the lengthwise direction of the part (contrary to manufacturer-approved procedures), areas of missing paint, and corrosion pitting. The operator reported that the spring had not been removed or reworked since they purchased the airplane more than 25 years before the accident.

Probable Cause and Findings: The National Transportation Safety Board determines the probable cause(s) of this accident to be -- The failure of the right main landing gear spring due to intergranular stress-corrosion cracking that progressed into fatigue. Contributing to the accident was the improper rework of the spring at an undetermined time.

FMI: www.ntsb.gov

Advertisement

More News

Aero-News: Quote of the Day (05.13.25)

“...no entity, whether a division of government or a private company or corporation, may use information broadcast or collected by automatic dependent surveillance-broadcast >[...]

IAG Orders 76 Boeing, Airbus Airliners

Growth And Fleet Replacements On The Way International Airlines Group, a joint holding company between British and Spanish air carriers, announced it has ordered up to 76 new Boein>[...]

FAA Shuts Down ATC Oversight Review Amid Scrutiny

Expert Analysts Scrutinized the FAA’s Oversight of ATC Organization In a move that appears somewhat mistimed (at best…tone-deaf at worst), the Federal Aviation Adminis>[...]

Montana’s ADS-B Privacy Bill Signed Into Law

Community Continues to Push Back Against ADS-B-Facilitated Landing Fees On May 8, a bill to limit frivolous use of ADS-B tracking data was signed into law by Montana Governor Greg >[...]

Newark Falls Victim to More Equipment Outages

Duffy Shares Plans to Scale Back Flights at Newark Liberty International After a ‘telecommunications issue’ with Philadelphia TRACON brought yet another string of delay>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC