AD: The Boeing Company Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.14.25

Airborne-NextGen-04.15.25

AirborneUnlimited-04.16.25

Airborne-AffordableFliers-04.17.25

SunnFun-DayFour-04.03.25

Thu, May 12, 2022

AD: The Boeing Company Airplanes

AD 2022-08-12 Prompted By Reports Of Bolt Rotation In The Engine Drag Fitting Joint...

The FAA is superseding Airworthiness Directive (AD) 2020-21-17, which applied to all The Boeing Company Model 757 airplanes.

AD 2020-21-17 required repetitive inspections for skin cracking and shim migration at the upper link drag fittings, diagonal brace cracking, and fastener looseness; and applicable on-condition actions. This AD was prompted by reports of bolt rotation in the engine drag fitting joint and fastener heads and cracks found in the skin of the fastener holes, and the need to reduce the compliance time for certain groups. This AD retains the requirements of AD 2020-21-17 with reduced compliance times for certain airplane groups. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective June 10, 2022.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede AD 2020-21-17, Amendment 39-21290 (85 FR 79418, December 10, 2020) (AD 2020-2117). AD 2020-21-17 applied to all The Boeing Company Model 757 airplanes. The NPRM published in the Federal Register on September 9, 2021 (86 FR 50485). The NPRM was prompted by reports of bolt rotation in the engine drag fitting joint and fastener heads and cracks found in the skin of the fastener holes, and the need to reduce the compliance time for certain groups. In the NPRM, the FAA proposed to retain the requirements of AD 2020-21-17 with reduced compliance times for certain airplane groups. The FAA is issuing this AD to address cracking in the wing upper skin and forward drag fittings, which could lead to a compromised upper link and reduced structural integrity of the engine strut, and possible separation of a strut and engine from the airplane during flight.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (04.19.25): Discrete Code

Discrete Code As used in the Air Traffic Control Radar Beacon System (ATCRBS), any one of the 4096 selectable Mode 3/A aircraft transponder codes except those ending in zero zero; >[...]

ANN's Daily Aero-Linx (04.19.25)

Aero Linx: The Museum of Flight The Museum of Flight is the largest independent, non-profit air and space museum in the world! With over 175 aircraft and spacecraft, tens of thousa>[...]

Classic Aero-TV: Light, Adaptable, Innovative - Clarity Aloft Intro’s the Flex!

From 2018 (YouTube Edition): Clarity Aloft Introduces The TSO Certified Flex Headset The newest addition to the Clarity Aloft headset range is a big departure from previous designs>[...]

Aero-News: Quote of the Day (04.20.25)

“Despite this development, we strongly encourage WestJet management to work with ALPA pilot representatives to find more practical solutions for attracting and retaining skil>[...]

NTSB Prelim: PPHU Ekolot KR-030 Topaz

Pilot Stated That He Did Not Recall Any Aspects Of The Accident Sequence On April 8, 2025, about 1308 central daylight time, a PPHU Ekolot KR-030 Topaz light sport airplane, N568RD>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC