20 Years Ago Today: The 'Gimli Glider' | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-11.24.25

AirborneNextGen-
11.18.25

Airborne-Unlimited-11.19.25

Airborne-AffordableFlyers-11.20.25

AirborneUnlimited-11.21.25

LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Wed, Jul 23, 2003

20 Years Ago Today: The 'Gimli Glider'

What Was the Second-Most-Famous Town in Canada, 20 Years Ago?

It's hard to believe that it was 20 years ago, when most of us first heard of Gimli, Manitoba. It's a heck of a place to land a 767, even today; but on July 23, 1983, Captain Bob Pearson and First Officer Maurice Quintal were sitting in the front seats of Air Canada Flight 143, cruising along at a heady 41,000 feet, when trouble hit: the big bird was running out of fuel.

The flight had left Montreal with every intention of going to Edmonton; nobody had planned on a stop... in Winnipeg. As it turned out, Winnipeg would have looked good, really good.

Captain Pearson learned a few things that day himself, as he found himself with four crew members and just 61 PAX in a glider, 28,500 feet up -- but still 65 miles out of Winnipeg.

F.O. Quintal remembered having been stationed at Gimli, which, as a disused base, wasn't on the airline's charts; but he reckoned its 6800-foot runways would be clear... if they were still there. They were, and in good condition. Still, they were a long way down, and kinda short; and there wasn't going to be a go-around. [The shot of Gimli (above), taken from a Space Shuttle years ago, probably looked like what Captain Pearson saw --ed.]

Pearson conserved altitude until he had the field in sight, and then noticed that he had conserved plenty. He was 'way high. Having been trained properly in the finer aspects of puddle-jumper piloting, he did what any good Taylorcraft or Aeronca or Cub pilot would have done: he slipped his 300,000 pound Boeing in, to an otherwise uneventful landing. It was delicate -- that big rudder was stuck on the end of a very long tube made of of very thin aluminum -- but it was do-able, as they all found out. (Good ol' Boeing, overbuilt just enough.)

The only injuries were registered when the passengers used the slides.

They still fly gliders out of Gimli. They fly 'em in, too -- but most of those gliders weigh less than your car, not more than your house.

For you historians, here's a great account of the whole event:

FMI: www.casa.gov.au/avreg/fsa/03jul/22-27.pdf

Advertisement

More News

Airborne 11.24.25: ANN's 30th!, Starship’s V3 Booster Boom, Earhart Records

Also: 1st-Ever Space Crime Was a Fraud, IAE Buys Diamonds, Kennon Bows Out, Perseverance Rover An interesting moment came about this past Sunday as ANN CEO, Jim Campbell, noted tha>[...]

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Classic Aero-TV: DeltaHawk Aero Engine Defies Convention

From 2023 (YouTube Edition): Deviation from the Historical Mean Racine, Wisconsin-based DeltaHawk is a privately-held manufacturer of reciprocating engines for aircraft and hybrid >[...]

NTSB Final Report: Glasair GlaStar

Smoke Began Entering The Cockpit During The Landing Flare, And Then The Pilot Noticed Flames On The Right Side Of The Airplane Analysis: The pilot reported that about 30 minutes in>[...]

ANN's Daily Aero-Term (11.22.25): Remote Communications Outlet (RCO)

Remote Communications Outlet (RCO) An unmanned communications facility remotely controlled by air traffic personnel. RCOs serve FSSs. Remote Transmitter/Receivers (RTR) serve termi>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC