NTSB Prelim Issued on BJ Schramm's Accident | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-12.01.25

AirborneNextGen-
12.02.25

Airborne-Unlimited-11.19.25

Airborne-AffordableFlyers-11.20.25

AirborneUnlimited-11.21.25

LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Sat, May 29, 2004

NTSB Prelim Issued on BJ Schramm's Accident

Few Clues As To What Claimed Industry Legend

NTSB Identification: SEA04LA074
14 CFR Part 91: General Aviation
Accident occurred Tuesday, April 27, 2004 in Montour, ID
Aircraft: Schramm Helicycle, registration: N3275Q
Injuries: 1 Fatal.

This is preliminary information, subject to change, and may contain errors. Any errors in this report will be corrected when the final report has been completed.

On April 27, 2004, approximately 1500 mountain daylight time, a Schramm Helicycle experimental/homebuilt helicopter, N3275Q, was destroyed after impacting terrain near Montour, Idaho. The aircraft was registered to and operated by a private individual. The private pilot, sole occupant of the aircraft, was fatally injured. Visual meteorological conditions prevailed for the 14 CFR Part 91 personal flight, and a flight plan was not filed. The flight departed Montour at an undetermined time.

According to an FAA inspector, an alert notification (ALNOT) was issued for the aircraft approximately 1900 on April 27th. According to local law enforcement personnel, at 0819 on the morning of April 28th the aircraft was located by search and rescue personnel partially submerged in the Payette River about 1 mile northwest of Montour, Idaho. It was also reported by the inspector that prior to the accident a complaint had been reported to local authorities of two helicopters flying low over a school and residential areas in the Montour area. The inspector also reported that prior to the accident the pilot had landed at a local store in Montour and purchased some fuel for the aircraft. The store employee reported that the pilot complained about a problem with the fuel system, and that when the pilot started the engine he noticed a flame/torch during the starting sequence. Under the supervision of the inspector, the aircraft was recovered to a private facility for future examination.

According to the inspector, both main rotor blades were bent upward with minimal deformation and remained attached to the main rotor mast. The tail rotor drive shaft and both tail rotor blades were not located.

FMI: www.ntsb.gov/ntsb/brief.asp?ev_id=20040505X00557&key=1

Advertisement

More News

NTSB Prelim: Cirrus Design Corp SR20

The Airplane Made An Uncommanded Right Yaw And Roll, And He Was Unable To Maintain Control Of The Airplane On November 11, 2025, about 1750 central standard time, a Cirrus SR20, N8>[...]

ANN's Daily Aero-Linx (11.30.25)

Aero Linx: Florida Antique Biplane Association "Biplanes.....outrageous fun since 1903." That quote really defines what the Florida Antique Biplane Association (FABA) is all about.>[...]

ANN's Daily Aero-Term (11.30.25): Wind Shear Escape

Wind Shear Escape An unplanned abortive maneuver initiated by the pilot in command (PIC) as a result of onboard cockpit systems. Wind shear escapes are characterized by maximum thr>[...]

Aero-News: Quote of the Day (11.30.25)

“Working closely with the Polish Armed Forces, we’re focused on disciplined execution to help enhance Poland’s defense capabilities and keep up with the strong de>[...]

Airborne 11.26.25: Bonanza-Baron Fini, Archer v LA NIMBYs, Gogo Loses$$$

Also: Bell 505 on SAF, NYPA Gets Flak For BizAv 'Abuse', FAA Venezuela Caution, Horizon Update Textron Aviation has confirmed it will be ending production of the Beechcraft Bonanza>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC