NTSB Prelim: Bell 206B | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Mon, Oct 18, 2021

NTSB Prelim: Bell 206B

At 40 Knots And 175 Ft AGL, The Helicopter Started To Yaw To The Right

Location: Gonzales, LA Accident Number: CEN22LA009
Date & Time: October 6, 2021, 14:15 Local Registration: N373SP
Aircraft: Bell 206B Injuries: 1 Minor
Flight Conducted Under: Public aircraft

On October 6, 2021, about 1415 central daylight time, a Bell 206B helicopter, N373SP, sustained substantial damage when it was involved in an accident near Gonzales, Louisiana. The commercial pilot sustained minor injuries. The helicopter was operated as a public aircraft flight.

The pilot of the Louisiana State Police Air Support Unit helicopter reported that while on the downwind leg to land to runway 35 at the Louisiana Regional Airport (REG), Gonzales, Louisiana, he completed the before landing checks. The pilot then reduced the power and began to slow the helicopter to about 60 knots. After completing the base leg, he maneuvered the helicopter for final while at 400 ft agl. The pilot applied a small amount of power to sustain the  desired approach angle. While at 40 knots and 175 ft agl, the helicopter started to yaw to the right. The pilot applied left pedal and the helicopter continued to yaw to the right.

The pilot observed the trim indicator and confirmed that the helicopter was in trim, however he still had to apply left pedal. Shortly thereafter, the helicopter “aggressively” yawed to the right. The pilot applied forward cyclic input and the helicopter rolled to the left while it continued to rotate “very aggressively” to the right. The pilot attempted to regain control using cyclic input, however he was unable. The pilot decreased the throttle to idle, the helicopter began to settle, and he applied collective input to cushion the landing. The helicopter came to rest partially upright on the grass, with the skids split, about 200 ft short of the approach end of the runway. The pilot performed an emergency shutdown and was able to egress from the helicopter without further incident.

The helicopter sustained substantial damage to the main rotor system, the fuselage, the tailboom, and the tail rotor system. The wreckage was recovered for a future examination of the airframe and engine.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (07.10.25): Performance-Based Navigation (PBN) [ICAO]

Performance-Based Navigation (PBN) [ICAO] Area navigation based on performance requirements for aircraft operating along an ATS route, on an instrument approach procedure or in a d>[...]

NTSB Prelim: Cessna 172

The Airplane Came To Rest Underneath A Set Of Damaged Power Distribution Lines On The Floor Of A Coulee On June 19, 2025, at 1412 mountain daylight time, a Cessna 172K airplane, N7>[...]

ANN's Daily Aero-Linx (07.10.25)

Aero Linx: FAA Managers Association (FAAMA) Recognized by the FAA, FAAMA is a professional association dedicated to the promotion of excellence in public service. The Association i>[...]

Classic Aero-TV: The Big Business of Diminutive Powerplants

From 2023 (YouTube Edition): Jet Central Micro-Turbine Engines Impress Founded in the late-1990s, Mexico City-based Jet Central produces a unique and fascinating line of micro-turb>[...]

Airborne 07.11.25: New FAA Bos, New NASA Boss (Kinda), WB57s Over TX

Also: ANOTHER Illegal Drone, KidVenture Educational Activities, Record Launches, TSA v Shoes The Senate confirmed Bryan Bedford to become the next Administrator of the FAA, in a ne>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC