FAA Approves New Bell 412EPI Products | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Tue, Mar 11, 2014

FAA Approves New Bell 412EPI Products

Receive STCs For Thee New Options Including CVR/FDR

The FAA has granted supplemental type certificate (STC) approval for three new accessory options for the Bell 412EPI including a Cockpit Voice Flight Data Recorder (CV/FDR), Bell Helicopter Vibration Monitoring system (BHVM) and Helicopter Terrain Awareness System (HTAWS). All three Bell 412EPI STC-approved products are all available through the Aeronautical Accessories brand.

The CV/FDR is an “on-condition” line-replaceable unit that records both cockpit voice and flight data. The CV/FDR is capable of recording a minimum of 25 hours of flight data and two hours of audio. Flight data is recorded in flash memory and segregated from the cockpit voice data and may be downloaded to ground station equipment in approximately five minutes.
 
The new BHVM kit for the Bell 412EPI provides comprehensive airframe, rotor, engine and drive system vibration monitoring capability. Additionally, the system provides quick access aircraft data recording capability to support customer flight data monitoring (FDM) programs. The system is compatible with the new Bell 412EPI integrated avionics system.
 
For forward looking terrain and obstacle avoidance capability, the new Bell 412EPI Helicopter Terrain Awareness and Warning System (HTAWS) kit is now FAA approved and available. This kit has the Honeywell Mark XXII system which presents visual and aural signals to pilots in advance when potential hazards exist. The system is compatible with the new Bell 412EPI integrated avionics system.
 
“These three new products for the Bell 412EPI demonstrate Bell Helicopter’s continued commitment to developing parts and accessories that improve safety and maximize efficiency,” said Jennifer Lunceford, manager, Sales for Aeronautical Accessories. “We are pleased to add the newly approved kits to the ‘Safety and Mission’ section of the 2014 Aeronautical Accessories product catalog.”

(Bell 412EPI image from file)

FMI: www.aero-access.com

Advertisement

More News

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

ANN's Daily Aero-Linx (05.11.24)

Aero Linx: Pararescue Air Force Pararescuemen, also known as PJs, are the only DoD elite combat forces specifically organized, trained, equipped, and postured to conduct full spect>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC