Facility Will Sport Over 100,000 Sq. Ft. Of Space
Honda Aero, Inc. officially broke ground Wednesday on its new
corporate headquarters and jet engine plant in Burlington, NC on
property located adjacent to the Burlington-Alamance County
regional airport.
Honda Aero also announced it has successfully run a
proof-of-concept version of the GE Honda HF120 turbofan engine,
adding the engine has exceeded the company's internal development
targets for both thrust performance and specific fuel consumption
(SFP) on its first test run. The company is moving toward its goals
of engine certification in 2009 followed by the start of mass
production in late 2010.
"Today, we break new ground for
Honda and our effort to enter the business of aviation," said
Satoshi Toshida, senior managing director of Honda Motor Co., Ltd.
"The GE Honda Aero engines built here in North Carolina will power
a new class of advanced light jets."
The 102,400-square foot Honda Aero facility will consist of
36,000 square feet of office space, a 58,400-square foot production
plant, and an 8,000-square foot engine test cell. Honda Aero will
employ approximately 70 associates when the plant reaches its
initial annual capacity of 200 GE Honda engines within about one
year of production startup. The company is investing approximately
$27 million for construction of the headquarters and manufacturing
facility, including equipment.
Sporting what Honda says is a higher thrust-to-weight ratio and
lower fuel consumption than other turbofans in its thrust class,
the GE Honda HF120 has been chosen to power Spectrum Aeronautical's
Freedom jet, and the HondaJet -- which will be produced in
neighboring Greensboro, NC by the Honda Aircraft Company, Inc., a
separate Honda company.
The HF120 is a higher thrust successor to Honda's original HF118
prototype engine, which has accumulated more than 4,000 hours of
testing on the ground and in-flight. Honda research on jet engine
technology started in 1986, with development of the HF118 engine
beginning in 1999. GE-Honda collaboration on the HF120 began in
early 2005. The first core test of the GE Honda HF120 was conducted
in early 2007, followed by full-engine testing later in the
year.
GE Honda Aero Engines is a joint venture between GE Aviation and
Honda Aero, established in 2004 for the development, certification
and commercialization of jet engines in the 1,000 to 3,500 pounds
thrust class.