Wing Centreline Splice Joint 6/2003
Applicability: Models AT-300, AT-301, AT-302, and
AT-400A aircraft, all serial numbers, that
have aluminium spar caps; Models AT-400 aircraft, serial numbers
400-0244 through 400-0415, that have aluminium spar caps; Models
AT-300 and AT-301 aircraft, all serial numbers, that have aluminium
spar caps and are, or have been converted to turbine power. Accomplish either the Requirement 1 spar lower cap
replacement or the Requirement...
2 spar lower cap repetitive inspections.
Repetitively inspect the wing lower spar caps instead of
replacement...
Replace the wing spar lower caps before further flight after
whichever occurs first:
(i) The date of the scheduled replacement;
(ii) Cracks are found during any inspection allowed by Requirement
2 of this Directive; or,
(iii) Upon accumulating 600 hours time in service after the initial
inspection
accomplished in accordance with Requirement 2.b. of this
Directive.
This Amendment becomes effective on 7 May
2003.
Background: The FAA received a report of an in- flight separation
of a wing from a Model AT-400A aircraft. Investigation revealed
that fatigue caused the lower aluminium spar cap to fail across the
3/8- inch hole, 6.5 inches outboard of the fuselage centreline in
the centre splice connection. The actions specified in this
Directive are intended to detect and correct cracks in the
centreline splice joint. Undetected cracks could eventually result
in in- flight separation of the wing. Amendment 1 is issued in
response to a new FAA AD which further reduces the mandatory wing
spar lower cap replacement times; in response to inspection results
from FAA AD 2002-13-02.
The original issue of this Airworthiness Directive became effective
on 24 July 2002.
Aero Linx: Vertical Aviation Safety Team (VAST) The Vertical Aviation Safety Team (VAST) is a public–private initiative to enhance worldwide flight operations safety in all s>[...]
Maximum Authorized Altitude A published altitude representing the maximum usable altitude or flight level for an airspace structure or route segment. It is the highest altitude on >[...]
“The final hole size matched-drilled technology ensures that all parts align perfectly, reducing the need for measurements and adjustments. This advancement not only saves ti>[...]
Also: EAA Scholarship, Keewatin Air Pilots, Bell Textron Donates, Capt. Judy Cameron Scholarship On December 1, 2024, the FAA will be finalizing major changes for current and futur>[...]
An SnF2023 Favorite (YouTube Edition): The Stearman Storyteller A young Dutch boy looked on, rapt with amazement, as a T-6 pilot flew an aerobatic routine during an airshow long lo>[...]