NTSB Asks For Help In Locating Engine Parts | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Thu, Dec 20, 2007

NTSB Asks For Help In Locating Engine Parts

Southwest 737 Shed Parts Over East Texas In November

In its investigation of an uncontained engine failure that occurred on a Southwest Airlines flight from Dallas, TX (Love Field), to Little Rock, AR on November 17, the National Transportation Safety Board is searching for engine components that fell to the ground in a sparsely populated rural area of northeastern Texas.

As ANN reported, Flight 438 returned to DAL after the number two engine on the Boeing 737-300 failed. Pictures of the engine nacelle show a gaping hole in the outboard exterior of the engine fairing, and minor damage to the plane's fuselage.

Despite earlier assertions by Southwest the jet experienced "a vibration" shortly after takeoff, necessitating the emergency landing, the NTSB agrees with passenger reports of the incident -- that pieces of the fan blades and the spinner separated from the right engine.

The NTSB says the incident occurred as the plane climbed through FL250, over Hunt County. The crew shut down the damaged engine and returned safely to Dallas on power from the number one engine. None of the 133 passengers or 5 crewmembers on board the B-737-300 (N676SW) aircraft were injured.

NTSB engineers developed a Ballistic Trajectory Analysis using data such as the aircraft ground track, speed, prevailing winds and other factors, to create an area where the engine pieces are most likely to be found. The area is approximately 0.4 miles wide and 1.7 miles long, and is located on private property. 

The owners of the property whose land is in the identified area will be contacted by the Hunt County sheriff's office and will be asked to notify the sheriff if an aircraft engine part is discovered. Because these engine parts and the exact location of discovery are essential to its investigation, the NTSB stresses parts should not be handled by the public, but instead should be marked in place.

If found, the NTSB asks people to contact the Hunt County sheriff's office at (903) 453-6800 -- and stresses anyone volunteering to search for these items to respect private property rights, and get permission of the landowner before searching on another's property.

FMI: www.ntsb.gov, www.southwest.com

Advertisement

More News

ANN's Daily Aero-Term (04.24.24): Runway Lead-in Light System

Runway Lead-in Light System Runway Lead-in Light System Consists of one or more series of flashing lights installed at or near ground level that provides positive visual guidance a>[...]

ANN's Daily Aero-Linx (04.24.24)

Aero Linx: Aviation Without Borders Aviation Without Borders uses its aviation expertise, contacts and partnerships to enable support for children and their families – at hom>[...]

Aero-FAQ: Dave Juwel's Aviation Marketing Stories -- ITBOA BNITBOB

Dave Juwel's Aviation Marketing Stories ITBOA BNITBOB ... what does that mean? It's not gibberish, it's a lengthy acronym for "In The Business Of Aviation ... But Not In The Busine>[...]

Classic Aero-TV: Best Seat in The House -- 'Inside' The AeroShell Aerobatic Team

From 2010 (YouTube Version): Yeah.... This IS A Really Cool Job When ANN's Nathan Cremisino took over the lead of our Aero-TV teams, he knew he was in for some extra work and a lot>[...]

Airborne Affordable Flyers 04.18.24: CarbonCub UL, Fisher, Affordable Flyer Expo

Also: Junkers A50 Heritage, Montaer Grows, Dynon-Advance Flight Systems, Vans' Latest Officially, the Carbon Cub UL and Rotax 916 iS is now in its 'market survey development phase'>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC