Fri, Apr 07, 2017
Moves Towards European Certification
Sonaca Aircraft rolled out the Sonaca 200 in a ceremony in Gosselies, Belgium on April 3. In this new version of the Sonaca 200, 80% of the structure has been redesigned compared to the initial “Amateur Construction” version.
The single-engine two-place airplane is on track to obtain EASA certification by the end of September. It is specially designed and adapted for pilot training and leisure flights. This is the second model assembled in Belgium by Sonaca Aircraft as part of the certification program.
The first aircraft assembled in Gosselies was intended for static tests. The aircraft was used to test the resistance of the seats, seat belts (harnesses), engine cradle, the nose gear strut as well as the wings. "We have just completed the most critical test of the static certification campaign, which is the wing loading, ultimate and failure limit" explained Carl Mengdehl, Engineering & Certification, Sonaca Aircraft.
The wing static test showed:
Wing resistance up to 11g and a secure failure mode (as the control surfaces remain operational at this load);
Calculation forecasts by numerical simulation that are extremely faithful and close to test values.
"The excellent test results, which have been acknowledged by the certification authorities, have validated our calculation methods as well as Sonaca Aircraft’s engineering skills" said Carl Mengdehl.
The success of the static test program allows Sonaca Aircraft to start flight tests. "After some final adjustments on the aircraft and the first engine commissioning and taxiing/braking tests, the aircraft will make its first flight on around April 20 followed by the flight envelope opening tests. It will then fly for the South of France (Avignon) where it will continue the flight test campaign," said Pierre Van Wetter, Sonaca Aircraft Pilot and Chief Sales Manager.
Sonaca 200 production activities are scheduled to be launched in June 2017.
(Image provided with Sonaca Aircraft news release)
More News
Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]
“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]
Also: 1800th E-Jet, Uncle Sam Sues For Landing Gear, Embraer Ag Plane, Textron Parts A friend of the family reported that Lt. Col. (Ret.) Richard Glenn Rutan flew west on Friday, M>[...]
Also: Virgin Galactic, B-29 Doc to Allentown, Erickson Fire-Fighters Bought, FAA Reauthorization After dealing with a big letdown after the unexpected decision by Skyreach to disco>[...]
"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]