AD: Piper Aircraft, Inc. Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-11.17.25

AirborneNextGen-
11.11.25

Airborne-Unlimited-11.12.25

Airborne-FltTraining-11.13.25

AirborneUnlimited-11.14.25

LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Mon, Apr 19, 2021

AD: Piper Aircraft, Inc. Airplanes

AD 2021-09-02 Corrects An Incorrect Modification Kit Part Number

The FAA is superseding Airworthiness Directive (AD) 2021-04-07 which applied to certain Piper Aircraft, Inc., (Piper) Models PA-46-350P (Malibu Mirage), PA-46R-350T (Malibu Matrix), and PA-46-500TP (Malibu Meridian) airplanes.

AD 2021-04-07 required identifying and correcting nonconforming stall warning heat control systems. Since AD 2021-04-07 was issued, the FAA was notified of an error in the stall warning heat control modification kit part number. This AD retains all of the actions in AD 2021-04-07 and corrects the incorrect modification kit part number. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective April 16, 2021.

Supplementary Information: The FAA issued AD 2021-04-07, Amendment 39-21428 (86 FR 10770, February 23, 2021), (AD 2021-04-07), for certain Piper Models PA-46-350P (Malibu Mirage), PA-46R-350T (Malibu Matrix), and PA-46-500TP (Malibu Meridian) airplanes. AD 2021-04-07 required identifying and correcting nonconforming stall warning heat control systems. AD 2021-04-07 resulted from the finding of airplanes without the proper stall warning heater modification design change. Without the proper stall warning heat control modification kit, during flights into icing conditions with the landing gear down, ice can form on the stall vane, which may result in failure of the stall warning system. The FAA issued AD 2021-04-07 to require identifying and correcting nonconforming stall warning heat control systems, which, if not addressed, could result in the pilot being unaware of an approaching stall situation.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (11.16.25): NonApproach Control Tower

NonApproach Control Tower Authorizes aircraft to land or takeoff at the airport controlled by the tower or to transit the Class D airspace. The primary function of a nonapproach co>[...]

Aero-News: Quote of the Day (11.16.25)

“This shutdown inflicted real damage. Beyond disrupting operations and adding risk into the aviation system… it hindered essential career growth opportunities and stal>[...]

ANN's Daily Aero-Linx (11.16.25)

Aero Linx: The Mooney Mite Site Dedicated to the Mooney M-18 Mite, "The Most Personal Airplane," and to supporting Mite owners everywhere. The Mooney M-18 Mite is a single-place, l>[...]

NTSB Final Report: Vans Aircraft Inc RV-12

Pilot’s Improper Installation Of The Control Stick Pushrod Assemblies, Which Resulted In Separation Of The Left Pushrod And A Total Loss Of Roll Control Analysis: While retur>[...]

ANN FAQ: How Do I Become A News Spy?

We're Everywhere... Thanks To You! Even with the vast resources and incredibly far-reaching scope of the Aero-News Network, every now and then a story that should be reported on sl>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC