AD: Airbus SAS Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Fri, Aug 28, 2020

AD: Airbus SAS Airplanes

AD 2020-17-01 Prompted By Reports Of Fuel Leaks At The Interface Of The Low Pressure Shut Off Valves

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A319-115 and -153N; A320-214, -216, -232, -251N, -252N, -271N, and -273N; and A321-211, -231, -251N, -253N, -271N, -272N, -251NX, -252NX, -253NX, and -271NX airplanes.

This AD was prompted by reports of fuel leaks at the interface of the low pressure shut off valves on the pylon areas of engines 1 and 2 due to improperly installed parts during production. This AD requires a one-time detailed inspection of each low pressure shut off valve on the pylon areas of engines 1 and 2 for correct installation, and replacing the O-rings and torqueing the mounting bolts within specified values as applicable, as specified in a European Union Aviation Safety Agency (EASA) AD 2020-0148, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD becomes effective September 9, 2020.

Supplementary Information: The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2020-0148, dated July 6, 2020 (“EASA AD 2020-0148”) (also referred to as the Mandatory Continuing Airworthiness Information, or “the MCAI”), to correct an unsafe condition for certain Airbus SAS Model A319-115 and -153N; A320-214, -216, -232, -251N, -252N, -271N, and -273N; and A321-211, -231, -251N, -253N, -271N, -272N, -251NX, -252NX, -253NX, and -271NX airplanes.

This AD was prompted by reports of fuel leaks at the interface of the low pressure shut off valves on the pylon areas of engines 1 and 2 due to improperly installed parts during production. The FAA is issuing this AD to address incorrect installation of the low pressure shut off valves, which could result in fuel spillage in the flammable zone. This condition, if not corrected, could result in an uncontrollable fire in an engine pylon. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC