Thu, Jul 24, 2003
Advertisement
More News
ANN's Daily Aero-Term (12.04.25): Cooperative Surveillance
Cooperative Surveillance Any surveillance system, such as secondary surveillance radar (SSR), wide-area multilateration (WAM), or ADS-B, that is dependent upon the presence of cert>[...]
ANN's Daily Aero-Linx (12.04.25)
Aero Linx: OX5 Aviation Pioneers Incorporated in 1955 as a Pa 501 (c)(3) Not for Profit Corporation, the OX5 Aviation Pioneers is dedicated to bringing before the public the accomp>[...]
NTSB Prelim: Extra Flugzeugproduktions EA 300/SC
The Pilot Appeared To Regain Control After Six Rotations And Attempted To “Fly Out” Inverted But Had Insufficient Altitude On November 8, 2025, at 1038 eastern standard>[...]
Classic Aero-TV: The Bally Bomber - The All Time Ultimate Warbird Replica?
From 2018 (YouTube Edition): Aero-News Talks With The Airplane's Builder One of the many unique airplanes at AirVenture 2018 was a 1/3-scale B-17 bomber built by Jack Bally, who ta>[...]
ANN's Daily Aero-Linx (12.05.25)
Aero Linx: Society of U.S. Army Flight Surgeons (SoUSAFS) The Society of US Army Flight Surgeons (SoUSAFS) serves to advance the science and art of Aerospace Medicine and its allie>[...]
blog comments powered by Disqus


Raburn explained, "We had an actuator
failure, which caused the right main [gear] leg to collapse on
rollout -- the actuator -- literally the casting -- split open."
Vendor problem, in the qualification or acceptance cycle. "The good
news is, we long ago terminated our contract with that company. We
were just using the old one, because we had the parts," he
said.


