NTSB Prelim: Jahnke Lionel G Glasair III | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-10.06.25

AirborneNextGen-
10.07.25

Airborne-Unlimited-10.08.25

Airborne-FlightTraining-10.09.25

AirborneUnlimited-10.10.25

Mon, Dec 13, 2021

NTSB Prelim: Jahnke Lionel G Glasair III

Fragments Of The Airplane Were Scattered About 200 Ft Upslope From The Main Wreckage

Location: Big Bear City, CA Accident Number: WPR22FA044
Date & Time: November 20, 2021, 16:56 Local Registration: N291KT
Aircraft: Jahnke Lionel G Glasair III Injuries: 1 Fatal
Flight Conducted Under: Part 91: General aviation - Personal

On November 20, 2021, about 1656 Pacific standard time, an experimental amateur-built GlasAir III N291KT, was destroyed when it was involved in an accident near San Bernardino, California. The pilot was fatally injured. The airplane was operated as a Title 14 Code of Federal Regulations (CFR) Part 91 personal flight.

The pilot was noticed missing on November 21, 2021, and a search for the airplane began. Subsequently, the airplane wreckage was located near the summit of San Bernardino Peak. According to preliminary radar data, the airplane departed Camarillo Airport, Camarillo, California, on a cross-country flight. The last radar return indicated that the airplane’s altitude was about 9,300 ft msl on a heading of 095°, and the ground speed was 219 knots. The airplane impacted mountainous terrain on about the same heading and altitude.

Examination of the wreckage site revealed a disturbed area of rocks and trees where the airplane impacted the terrain. Fragments of the wings and fuselage were located in this area. The only portion of the airplane that was relatively intact was the tail section, which was also found with the main wreckage. All the flight control surfaces on the vertical stabilizer and horizontal stabilizers remained attached.

Fragments of the airplane were scattered about 200 ft upslope from the main wreckage and about 100 ft below the site. The engine, which had sustained substantial impact damage during the accident sequence, had separated from the fuselage and was located about 100 ft upslope of the main wreckage.

The propeller blades and hub had separated. VFR weather conditions were reported over the region. No SIGMETs or convective SIGMETs were active for the area. Additionally, there were no NWS weather advisories current for the area.

FMI: www.ntsb.gov

Advertisement

More News

Aero-News: Quote of the Day (10.16.25)

“This integration marks a significant step forward in cockpit connectivity and safety. It is one of few solutions offered to business aviation and rotorcraft operators that p>[...]

Airborne 10.15.25: Phantom 3500 Confounds, Citation CJ3 Gen2 TC, True Blue Power

Also: Kodiak 100 Joins USFS, Innovative Solutions & Support Renamed, Gulfstream Selects Honeywell, Special Olympics Airlift The Phantom 3500 mockup made an appearance where the>[...]

ANN's Daily Aero-Term (10.16.25): Enhanced Flight Vision System (EFVS)

Enhanced Flight Vision System (EFVS) An EFVS is an installed aircraft system which uses an electronic means to provide a display of the forward external scene topography (the natur>[...]

True Blue Power and Mid-Continent Instruments and Avionics Power NBAA25 Coverage

Mid-Continent Instruments and Avionics and True Blue Power ANN's NBAA 2025 Coverage... Visit Them At Booth #3436 True Blue Power Unveils 50 Amp-hour Lithium-ion, Main Ship Battery >[...]

NTSB Final Report: Bellanca 17-30A

Shortly After Takeoff, The Engine Completely Lost Power Analysis: The pilot reported that the engine start, run-up, and takeoff were without incident. However, shortly after takeof>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC