Whistleblower Reveals New Hazardous Air Traffic Procedures | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Mon, Nov 25, 2019

Whistleblower Reveals New Hazardous Air Traffic Procedures

Says Changes In SOP At Jacksonville ARTCC Put Flying Public at Greater Risk

The U.S. Office of Special Counsel (OSC) has sent letters to the President and Congress alerting them that noncompliance with Federal Aviation Administration (FAA) rules by air traffic controllers at a Florida control center is creating hazardous conditions that could increase the likelihood of events such as midair collisions. A whistleblower, who is an air traffic control specialist, disclosed to OSC that air traffic controllers at the Jacksonville Air Route Traffic Control Center (ARTCC) in Hilliard, Florida do not comply with FAA rules when transferring aircraft from one airspace sector to another. Rather than address controllers' noncompliance with the rules, ARTCC managers implemented a change in standard operating procedures (SOPs) that is creating potentially hazardous air traffic conditions. An investigation by FAA substantiated the whistleblower's allegations, but FAA has still not modified the SOPs.

FAA found that the change in SOPs creates a safety hazard by moving aircraft dangerously close to one another at the same altitude. This deviation gives controllers very little time and space to react and prevent a possible collision. For its investigation, FAA interviewed several supervisors and controllers, all of whom stated that the SOP change was “hazardous" or “introduced risk." The supervisors of the affected sectors stated they had no knowledge or involvement in the SOP change until its implementation.

“Despite being alerted to these troubling findings, FAA management has failed to take appropriate corrective action," said Special Counsel Henry J. Kerner. “The Safety Risk Management process is not merely an exercise in completing forms. It involves a critical safety analysis to identify and mitigate hazards posed by air traffic procedures. Every supervisor and controller interviewed by FAA stated that the SOP change is hazardous or introduces risk, yet FAA continues to use these procedures without modification. We urge FAA to reconsider its position and take immediate corrective action."

(Source: U.S. Office Of Special Counsel news release. FAA image)

FMI: osc.gov

Advertisement

More News

ANN's Daily Aero-Term (06.30.25): Ground Stop (GS)

Ground Stop (GS) The GS is a process that requires aircraft that meet a specific criteria to remain on the ground. The criteria may be airport specific, airspace specific, or equip>[...]

ANN's Daily Aero-Linx (06.30.25)

Aero Linx: Australian Transport Safety Bureau (ATSB) The Australian Transport Safety Bureau (ATSB) improves safety and public confidence in aviation, marine and rail transport thro>[...]

Aero-News: Quote of the Day (06.30.25)

“The Palo Alto stopover confirmed—yet again—that flight schools and aero-clubs are no longer just curious about electric training; they are ready to buy. In just >[...]

NTSB Final Report: ICON A5

Pilot’s Failure To Maintain Clearance From The Water While Flying At A Low Altitude Analysis: The flight of two airplanes was in cruise flight on a north heading about 50 ft >[...]

Airborne Affordable Flyers 06.26.25: PA18 Upgrades, ‘Delta Force’, Rhinebeck

Also: 48th Annual Air Race Classic, Hot Air Balloon Fire, FAA v Banning 100LL, Complete Remote Pilot The news Piper PA-18 Super Cub owners have been waiting for has finally arrived>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC