NTSB Publishes Initial Details On Miller SNJ Accident | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Sun, Jul 19, 2009

NTSB Publishes Initial Details On Miller SNJ Accident

Accomplished Warbird Pilot Lost In Aerobatic Practice

The NTSB has filed the first concrete details in the investigation into the fatal accident that claimed SNJ pilot and airshow flyer, Gary Miller. Miller was an ATP who had been flying since 14 years of age and was taught to fly by his Dad. He had over 800 hours in the SNJ/T-6 and some 2500 hours total time. Most recently, he made a living in aviation sales and as a corporate pilot. He was Reno race qualified and had raced for several years. He also was an ICAS member with a low-level aerobatic waiver.

NTSB Identification: CEN09FA425
14 CFR Part 91: General Aviation
Accident occurred Thursday, July 09, 2009 in Simila, CO
Aircraft: NORTH AMERICAN SNJ-5, registration: N212TC
Injuries: 1 Fatal.

This is preliminary information, subject to change, and may contain errors. Any errors in this report will be corrected when the final report has been completed.

On July 9, 2009, about 1255 mountain daylight time, a North American SNJ-5 model airplane, N212TC, was destroyed following impact with terrain near Simla, Colorado. The airline transport pilot was fatally injured. The flight was being conducted under the provisions of Title 14 Code of Federal Regulations Part 91. Visual meteorological conditions prevailed at the time of the accident.

Four witnesses observed the airplane performing aerobatic maneuvers for approximately 15 minutes. They could not estimate how high the airplane was flying, but indicated it was too high to make out details on the airplane. They observed the airplane pull up vertical and perform a wing over or roll type maneuver. The airplane then entered a spin, which continued until the airplane impacted the ground. A post impact fire erupted immediately after impact.

Examination of the airplane showed the fuselage from the leading edge of the horizontal stabilizer forward to the engine firewall mostly consumed by fire. The inboard half of the left wing and the inboard four feet of the right wing were mostly consumed by fire.

All flight control surfaces were present in the wreckage and flight control cable continuity was verified from all flight control surfaces to the forward cockpit.

FMI: www.ntsb.gov

Advertisement

More News

NTSB Final Report: Rutan Long-EZ

He Attempted To Restart The Engine Three Times. On The Third Restart Attempt, He Noticed That Flames Were Coming Out From The Right Wing Near The Fuel Cap Analysis: The pilot repor>[...]

ANN FAQ: Turn On Post Notifications

Make Sure You NEVER Miss A New Story From Aero-News Network Do you ever feel like you never see posts from a certain person or page on Facebook or Instagram? Here’s how you c>[...]

Classic Aero-TV: ICAS Perspectives - Advice for New Air Show Performers

From 2009 (YouTube Edition): Leading Air Show Performers Give Their Best Advice for Newcomers On December 6th through December 9th, the Paris Las Vegas Hotel hosted over 1,500 air >[...]

ANN's Daily Aero-Linx (06.28.25)

Aero Linx: NASA ASRS ASRS captures confidential reports, analyzes the resulting aviation safety data, and disseminates vital information to the aviation community. The ASRS is an i>[...]

Aero-News: Quote of the Day (06.28.25)

“For our inaugural Pylon Racing Seminar in Roswell, we were thrilled to certify 60 pilots across our six closed-course pylon race classes. Not only did this year’s PRS >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC