NTSB Prelim: Cirrus Design Corp SR22T | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Sun, Mar 24, 2024

NTSB Prelim: Cirrus Design Corp SR22T

Engine RPM Surged A Few Times, Followed By The Sound Of A Loud Bang And Subsequent Total Loss Of Engine Power

Location: Bellevue, WA Incident Number: WPR24FA103
Date & Time: March 5, 2024, 17:04 Local Registration: N927CS
Aircraft: Cirrus Design Corp SR22T Injuries: 2 None
Flight Conducted Under: Part 91: General aviation - Instructional

On March 5, 2024, about 1704 Pacific standard time, a Cirrus SR-22T, N927CS, sustained minor damage when it was involved in an incident near Bellevue, Washington. The flight instructor and the pilot receiving instruction were not injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 instructional flight. The flight instructor and pilot receiving instruction reported that after takeoff from runway 34, Renton Municipal Airport, they leveled off at about 2,500 ft mean sea level (msl). A few minutes later, the engine RPM surged a few times, followed by the sound of a loud bang and subsequent total loss of engine power. Unable to restart the engine, they deployed the Cirrus Airframe Parachute System (CAPS), and the airplane descended under the parachute into a wooded wetland area adjacent to a residential neighborhood.

Examination of the incident site revealed that the airplane impacted terrain about 4 miles northeast of the departure end of runway 34. The airplane came to rest upright in an approximate 10° nose low attitude, on a heading of about 066° magnetic, at an elevation of about 417 ft msl.

The wreckage was recovered to a secure location for further examination. Review of the airframe and engine logbooks revealed that the engine, a Continental Motors TSIO-550-K1B, was overhauled in November 2019 and installed on the airframe in April 2020. At the time of the incident, the engine had accumulated about 680 hours since major overhaul. 

FMI: www.ntsb.gov

Advertisement

More News

Aero-News: Quote of the Day (07.11.25)

“Honored to accept this mission. Time to take over space. Let’s launch.” Source: SecTrans Sean Duffy commenting after President Donald Trump appointed U.S. Secret>[...]

ANN's Daily Aero-Term (07.11.25): Permanent Echo

Permanent Echo Radar signals reflected from fixed objects on the earth's surface; e.g., buildings, towers, terrain. Permanent echoes are distinguished from “ground clutter&rd>[...]

ANN's Daily Aero-Linx (07.11.25)

Aero Linx: European Hang Gliding and Paragliding Union (EHPU) The general aim of the EHPU is to promote and protect hang gliding and paragliding in Europe. In order to achieve this>[...]

NTSB Final Report: Schweizer SGS 2-33A

Glider Encountered A Loss Of Lift And There Was Not Sufficient Altitude To Reach The Airport Analysis: The flight instructor reported that while turning final, the glider encounter>[...]

NTSB Prelim: Aeronca 7AC

Airplane Climbed To 100 Ft Above Ground Level, At Which Time The Airplane Experienced A Total Loss Of Engine Power On May 24, 2025, at 1300 eastern daylight time, an Aeronca 7AC, N>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC