Dreamliner Passes Fuselage Barrel Tests | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Fri, Feb 29, 2008

Dreamliner Passes Fuselage Barrel Tests

Big Hurdle Cleared For Composite Airliner

For all the reports of late about all that's gone wrong with Boeing's 787 Dreamliner -- namely, mounting delivery delays stemming from a shortage of fasteners, and various other supplier woes -- Boeing would like everyone to note some things are going right, too.

On Thursday, the American planemaker announced the 787's composite technology, design and construction was proven to be up to the rigors of regular scheduled airline service, during a series of testing scenarios conducted beginning in late 2007 and concluding this week. The tests were performed on a composite fuselage test section, and are part of Boeing's certification efforts for the 787.

"The tests were very successful -- they couldn't have gone any better," said Kevin Davis, 787 fuselage authorized representative and leader of the testing.

Boeing says its engineers proved the composite barrel design through a series of incremental tests that first took the barrel to limit load, a test condition that simulates the most extreme conditions expected to be experienced in the life of the airplane.

Next, the test article was taken to 150 percent of limit load -- a condition called "ultimate load," the level required for certification. Finally, the team pushed the composite section past ultimate load well beyond ultimate load to a destruct-condition maneuver beyond two and a half times the force of gravity.

Testers observed audible indications of damage as the test progressed, but the piece did not reach the level of destruction that had been anticipated. Boeing engineers now are performing an extensive inspection of the barrel and analysis of test results.

The robust test program is key to clearing the Dreamliner for first flight. Some testing on the composite barrel section will continue, Boeing says, but it is at the company's discretion for additional learning, and not an FAA requirement.

Additional static testing is required, and will be conducted, on a full airplane structure prior to first flight.

FMI: www.boeing.com

Advertisement

More News

NTSB Final Report: Rutan Long-EZ

He Attempted To Restart The Engine Three Times. On The Third Restart Attempt, He Noticed That Flames Were Coming Out From The Right Wing Near The Fuel Cap Analysis: The pilot repor>[...]

ANN FAQ: Turn On Post Notifications

Make Sure You NEVER Miss A New Story From Aero-News Network Do you ever feel like you never see posts from a certain person or page on Facebook or Instagram? Here’s how you c>[...]

Classic Aero-TV: ICAS Perspectives - Advice for New Air Show Performers

From 2009 (YouTube Edition): Leading Air Show Performers Give Their Best Advice for Newcomers On December 6th through December 9th, the Paris Las Vegas Hotel hosted over 1,500 air >[...]

ANN's Daily Aero-Linx (06.28.25)

Aero Linx: NASA ASRS ASRS captures confidential reports, analyzes the resulting aviation safety data, and disseminates vital information to the aviation community. The ASRS is an i>[...]

Aero-News: Quote of the Day (06.28.25)

“For our inaugural Pylon Racing Seminar in Roswell, we were thrilled to certify 60 pilots across our six closed-course pylon race classes. Not only did this year’s PRS >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC