AD: Airbus Helicopters | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.05.25

Airborne-NextGen-05.06.25

AirborneUnlimited-05.07.25

Airborne-Unlimited-05.01.25

AirborneUnlimited-05.02.25

Fri, Jun 04, 2021

AD: Airbus Helicopters

AD 2021-10-25 Requires Cleaning Affected Parts, Visual And Dye Penetrant Inspections For Cracks Of Affected Parts

The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model EC130B4 and EC130T2 helicopters.

This AD was prompted by a report of cracks and geometrical non-conformities of the tail rotor blades (TRBs); all cracks initiated in the drain hole area at the blade root section. This AD requires cleaning affected parts, visual and dye penetrant inspections for cracks of affected parts, a dimensional inspection to verify conformity of affected parts, and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective July 6, 2021.

Supplementary Information: The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2020-0187, dated August 21, 2020 (EASA AD 2020-0187) (also referred to as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for all Airbus Helicopters Model EC130B4 and EC130T2 helicopters.

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Airbus Helicopters Model EC130B4 and EC130T2 helicopters. The NPRM published in the Federal Register on March 15, 2021 (86 [[Page 29177]] FR 14290). The NPRM was prompted by a report of cracks and geometrical non-conformities of the TRBs; all cracks initiated in the drain hole area at the blade root section. The NPRM proposed to require cleaning affected parts, visual and dye penetrant inspections for cracks of affected parts, a dimensional inspection to verify conformity of affected parts, and corrective actions if necessary, as specified in an EASA AD.

The FAA is issuing this AD to address geometrical non-conformities of the TRBs, which could lead to crack initiation and consequent blade failure, and possible loss of control of the helicopter. See the MCAI for additional background information

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (05.05.25): Circle To Runway (Runway Number)

Circle To Runway (Runway Number) Used by ATC to inform the pilot that he/she must circle to land because the runway in use is other than the runway aligned with the instrument appr>[...]

ANN's Daily Aero-Linx (05.05.25)

Aero Linx: National Aviation Safety Foundation (NASF) The National Aviation Safety Foundation is a support group whose objective is to enhance aviation safety through educational p>[...]

NTSB Prelim: De Havilland DHC-1

At Altitude Of About 250-300 Ft Agl, The Airplane Experienced A Total Loss Of Engine Power On November 6, 2024, at 1600 central standard time, a De Havilland DHC-1, N420TD, was inv>[...]

Classic Aero-TV: The Boeing Dreamliner -- Historic First Flight Coverage

From 2009 (YouTube Edition): Three Hour Flight Was 'Flawless' -- At Least, Until Mother Nature Intervened For anyone who loves the aviation business, this was a VERY good day. Afte>[...]

Airborne-NextGen 05.06.25: AF Uncrewed Fighters, Drones v Planes, Joby Crew Test

Also: AMA Names Tyler Dobbs, More Falcon 9 Ops, Firefly Launch Unsuccessful, Autonomous F-16s The Air Force has begun ground testing a future uncrewed jet design in a milestone tow>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC