NTSB Prelim: Bellanca 7ACA | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-12.01.25

AirborneNextGen-
12.02.25

Airborne-Unlimited-12.03.25

Airborne-FltTraining-12.04.25

AirborneUnlimited-12.05.25

AFE 2025 LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Sun, Feb 19, 2023

NTSB Prelim: Bellanca 7ACA

Pilot Executed A Forced Landing To A Field, But The Left Wing Collided With A Tree

Location: Bayport, MN Accident Number: CEN23LA101
Date & Time: February 4, 2023, 16:30 Local Registration: N9111L
Aircraft: Bellanca 7ACA Injuries: 1 Minor
Flight Conducted Under: Part 91: General aviation - Personal

On February 4, 2023, about 1630 central standard time, a Bellanca Aircraft 7ACA, N9111L, was substantially damaged when it was involved in an accident near Bayport, Minnesota. The pilot sustained minor injuries. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

The pilot reported that, before departure, he checked the fuel level in the wing fuel tanks with a dip stick and the level correlated to about 24 gallons. After departure from Lake Elmo Airport (21D), Lake Elmo, Minnesota, he flew for about 3 hours. While approaching 21D, the engine lost all power. The pilot executed a forced landing to a field, but the left wing collided with a tree during the forced landing. The airplane came to rest about 3 miles from 21D and sustained substantial damage to the fuselage and wings during the impact.

A postaccident examination by the Federal Aviation Administration found that the left-wing fuel cap was missing, and the fuel tank was void of fuel. The fuel cap was not located during a search of the area or of the fueling location at 21D. During recovery of the airplane, when the right wing was cut at the root, a fire ignited and consumed a portion of the right wing. During the accident sequence the seatbelt, an Aero Fabricators Model No. H-702-300, failed with a separation of the threading at the “Y” junction. The date of manufacturing stamp on the shoulder harness restraint was December 15, 2017. The shoulder harness label stated that the restraint system was an FAA-PMA part with a rated strength assembly of 1,500 pounds.

A detailed engine and airframe examination is pending.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (12.04.25): Cooperative Surveillance

Cooperative Surveillance Any surveillance system, such as secondary surveillance radar (SSR), wide-area multilateration (WAM), or ADS-B, that is dependent upon the presence of cert>[...]

ANN's Daily Aero-Linx (12.04.25)

Aero Linx: OX5 Aviation Pioneers Incorporated in 1955 as a Pa 501 (c)(3) Not for Profit Corporation, the OX5 Aviation Pioneers is dedicated to bringing before the public the accomp>[...]

NTSB Prelim: Extra Flugzeugproduktions EA 300/SC

The Pilot Appeared To Regain Control After Six Rotations And Attempted To “Fly Out” Inverted But Had Insufficient Altitude On November 8, 2025, at 1038 eastern standard>[...]

Classic Aero-TV: The Bally Bomber - The All Time Ultimate Warbird Replica?

From 2018 (YouTube Edition): Aero-News Talks With The Airplane's Builder One of the many unique airplanes at AirVenture 2018 was a 1/3-scale B-17 bomber built by Jack Bally, who ta>[...]

ANN's Daily Aero-Linx (12.05.25)

Aero Linx: Society of U.S. Army Flight Surgeons (SoUSAFS) The Society of US Army Flight Surgeons (SoUSAFS) serves to advance the science and art of Aerospace Medicine and its allie>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC