AeroSports Update: Bearhawk LSA To Make Its Sebring Debut | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Thu, Jan 15, 2015

AeroSports Update: Bearhawk LSA To Make Its Sebring Debut

Bearhawk Develops A Back-Country Quick Build Airplane Kit For The Sport Pilot

Bearhawk Aircraft has is planning to have its Bearhawk LSA make a first-time visit to the U.S. Sport Aviation Expo in Sebring, FL. The aircraft is the first Bearhawk LSA to be completed from a Quick Build kit. It will be on static display at the show and demonstration flights will be available to qualified buyers.

Bearhawk Aircraft owner Mark Goldberg completed the first Bearhawk LSA as a Quick Build kit. "We are proud to show the aviation community the most recent creation of Bearhawk design engineer Bob Barrows. While Bob has been flying his prototype Bearhawk LSA for two years, Bearhawk Aircraft has developed Quick Build kits for the design," stated Goldberg.

The Bearhawk LSA is a "rugged, sweet-handling airplane that is much more stout than most LSAs," according to Goldberg. Designed for a gross weight of 1500 lbs. (with utility category strength), the Bearhawk LSA has a huge safety margin when flown at LSA gross weight of 1320 lbs.

This first Bearhawk LSA built from a Quick Build kit has an empty weight of 818 lbs. including starter and full electrical system. With full fuel (30 gallons), this Bearhawk LSA has 322 pounds of useful load. At 75% power, the Bearhawk LSA has a cruise speed of 118 mph while burning under 6 GPH. Landing at 35 mph, most any strip will suffice for the Bearhawk LSA.

At AirVenture 2014 in Oshkosh, Bob Barrows competed in the Alaska STOL competition in his prototype Bearhawk LSA. Takeoff distance was 96 ft. with a landing distance of 130 ft.

The Bearhawk LSA lets current, and future, Sport Pilots join in the pleasures of the Bearhawk clan. With its similar look and feel, the Bearhawk LSA is a clean-sheet design with an all-new airfoil, developed by Harry Riblett. Construction is similar to other Bearhawk aircraft, with fuselage and tail surfaces of welded 4130 chromoly frames covered in fabric. The all-aluminum, flush riveted wings are supported by single left- and right-hand struts.

(Image provided by Bearhawk)

FMI:www.bearhawkaircraft.com
 

Advertisement

More News

ANN's Daily Aero-Linx (06.29.25)

Aero Linx: Transport Canada We are a federal institution, leading the Transport Canada portfolio and working with our partners. Transport Canada is responsible for transportation p>[...]

ANN's Daily Aero-Term (06.29.25): Gross Navigation Error (GNE)

Gross Navigation Error (GNE) A lateral deviation from a cleared track, normally in excess of 25 Nautical Miles (NM). More stringent standards (for example, 10NM in some parts of th>[...]

Classic Aero-TV: Anticipating Futurespace - Blue Origin Visits Airventure 2017

From AirVenture 2017 (YouTube Edition): Flight-Proven Booster On Display At AirVenture… EAA AirVenture Oshkosh is known primarily as a celebration of experimental and amateu>[...]

NTSB Final Report: Cirrus SR22

Aircraft Parachute System (CAPS) Was Deployed About 293 Ft Above Ground Level, Which Was Too Low To Allow For Full Deployment Of The Parachute System Analysis: The day before the a>[...]

Airborne Affordable Flyers 06.26.25: PA18 Upgrades, ‘Delta Force’, Rhinebeck

Also: 48th Annual Air Race Classic, Hot Air Balloon Fire, FAA v Banning 100LL, Complete Remote Pilot The news Piper PA-18 Super Cub owners have been waiting for has finally arrived>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC