FAA Addresses Multi-Switching Problem During Medical Examination | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.05.25

Airborne-NextGen-05.06.25

AirborneUnlimited-05.07.25

Airborne-Unlimited-05.01.25

AirborneUnlimited-05.02.25

Tue, Apr 01, 2014

FAA Addresses Multi-Switching Problem During Medical Examination

A Fat Finger Could Keep You Grounded

ANN April 1 Special Edition

As airliners have become equipped with more and more press switch devices a problem has been recognized called multi-switching. Multi-switching is when a pilot accidentally presses more than one switch when attempting to complete a system function. After concluding a five-year, multi-million-dollar study of  the problem, the FAA determined the primary cause of multi-switching is an oversized index finger.

An old joke floating around in the 1970s was that because of the proliferation of press-switches in the airline cockpit, Darwin’s theory of evolution dictated that airline pilots would evolve to become all ass and index finger. While the FAA had concluded years prior to the multi-switching problem that all airline pilots are already asses, they now intend to address the index finger by setting a maximum index finger circumference to be measured during an FAA first class medical exam.

The limiting circumference of the index finger has been determined to be 70 mm measured at the center of the finger-nail. This will be determined by placing an FAA approved “Index Finger Test Cup” over the finger; this procedure will be known as the multi-switch finger wave. If the pilot’s index finger exceeds the 70 mm measurement, further testing is required to assure the pilot can demonstrate press-switch accuracy. This will be performed on a keypad with press switches that randomly illuminate for a thirty second time period. The applicant must respond by pressing the randomly illuminated switches with an accuracy rate of no less than 70%.

The multi-switch finger wave test requirement becomes effective April 1, 2015.

FMI: www.faa.gov

Advertisement

More News

ANN's Daily Aero-Linx (05.06.25)

Aero Linx: International Federation of Airworthiness (IFA) We aim to be the most internationally respected independent authority on the subject of Airworthiness. IFA uniquely combi>[...]

ANN's Daily Aero-Term (05.06.25): Ultrahigh Frequency (UHF)

Ultrahigh Frequency (UHF) The frequency band between 300 and 3,000 MHz. The bank of radio frequencies used for military air/ground voice communications. In some instances this may >[...]

ANN FAQ: Q&A 101

A Few Questions AND Answers To Help You Get MORE Out of ANN! 1) I forgot my password. How do I find it? 1) Easy... click here and give us your e-mail address--we'll send it to you >[...]

Classic Aero-TV: Virtual Reality Painting--PPG Leverages Technology for Training

From 2019 (YouTube Edition): Learning To Paint Without Getting Any On Your Hands PPG's Aerospace Coatings Academy is a tool designed to teach everything one needs to know about all>[...]

Airborne 05.02.25: Joby Crewed Milestone, Diamond Club, Canadian Pilot Insurance

Also: Sustainable Aircraft Test Put Aside, More Falcon 9 Ops, Wyoming ANG Rescue, Oreo Cookie Into Orbit Joby Aviation has reason to celebrate, recently completing its first full t>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC