AD: Pratt & Whitney Division Turbofan Engines | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-11.17.25

AirborneNextGen-
11.11.25

Airborne-Unlimited-11.12.25

Airborne-FltTraining-11.13.25

AirborneUnlimited-11.14.25

LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Fri, Mar 29, 2019

AD: Pratt & Whitney Division Turbofan Engines

AD NUMBER: 2019-06-07

PRODUCT: Certain Pratt & Whitney Division (PW) PW4164, PW4164-1D, PW4168, PW4168-1D, PW4168A, PW4168A-1D, and PW4170 model turbofan engines.

ACTION: Final Rule.

SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2016-22-05 for the engines listed above.

AD 2016-22-05 required initial and repetitive inspections of the affected fuel nozzles and their replacement with parts eligible for installation.

This AD requires initial and repetitive inspections of the affected fuel nozzles and fuel nozzle supply manifold assemblies, replacement of the affected fuel nozzles with parts eligible for installation, and the installation of new brackets and clamps on the fuel nozzle supply manifold assemblies.

This AD was prompted by several instances of fuel leaks on PW engines with the Talon IIB combustion chamber configuration installed.

DATES: This AD is effective May 2, 2019.

COST: The FAA estimates that this AD affects 72 engines installed on airplanes of U.S. registry. Operators may incur the following costs in order to comply with this AD:

  • Inspect fuel nozzles: 2.2 work-hours × $85 per hour = $187 per engine.
  • Open and close cowl doors: (on-wing) 1 work-hour × $85 per hour = $85 per engine
  • Remove and replace (24) fuel nozzles: 48 work-hours × $85 per hour = $4,080, Parts $423,471. Cost per engine: $427,551
  • Remove and re-install necessary hardware according to AMM: 23 work-hours × $85 per hour = $1,955 per engine
  • Replace Fuel Nozzle Supply Manifold Assemblies and install new clamps/brackets: 16 work-hours × $85 per hour = $1,360. Parts $77,159. Cost per engine: $78,519
FMI: AD

Advertisement

More News

Aero-News: Quote of the Day (11.20.25)

“This recognition was evident during the TBMOPA Annual Convention, where owners and operators clearly expressed their satisfaction with our focus on customer service, and enc>[...]

ANN's Daily Aero-Term (11.20.25): Overhead Maneuver

Overhead Maneuver A series of predetermined maneuvers prescribed for aircraft (often in formation) for entry into the visual flight rules (VFR) traffic pattern and to proceed to a >[...]

ANN's Daily Aero-Linx (11.20.25)

Aero Linx: Glenn H. Curtiss Museum The Glenn H. Curtiss Museum, bearing the name of Hammondsport’s favorite son, is located on State Route 54, one half mile south of the vill>[...]

NTSB Prelim: Just Highlander

The Flight Instructor Noticed Some Engine Roughness And Diverted Toward Westwinds Airport On November 2, 2025, about 1630 mountain standard time, an experimental amateur-built Just>[...]

Classic Aero-TV: Just Like The 'Real' Thing – Redbird/Disney’s ‘Dusty’ FlightSim

From 2014 (YouTube Edition) -- Disclaimer: No Matter What He Tells You, Tom Is Not A Certified Firefighting Pilot While at EAA AirVenture 2014, ANN News Editor, Tom Patton checked >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC