AD: Pacific Aerospace Limited Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-11.04.24

Airborne-NextGen-11.05.24

Airborne-Unlimited-10.30.24

Airborne-FlightTraining-10.31.24

Airborne-Unlimited-11.01.24

Sat, Nov 06, 2021

AD: Pacific Aerospace Limited Airplanes

AD 2021-21-11 Requires Inspecting The Engine Mount, The Temperature Probe, And The Reversing Cable For Damage

The FAA is adopting a new airworthiness directive (AD) for certain Pacific Aerospace Limited Model 750XL airplanes.

This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as insufficient clearance between the engine mount, the Beta control rod, and the inter-turbine temperature (ITT) sensing probe that could lead to chafing damage. This AD requires inspecting the engine mount, the temperature probe, and the reversing cable for damage, and taking any necessary corrective actions. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective December 10, 2021.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain serial-numbered Pacific Aerospace Limited Model 750XL airplanes. The NPRM published in the Federal Register on July 28, 2021 (86 FR 40381). The NPRM was prompted by MCAI originated by the Civil Aviation Authority (CAA), which is the aviation authority for New Zealand. The CAA of New Zealand has issued AD DCA/750XL/35, effective date February 7, 2019 (referred to after this as “the MCAI”), to correct an unsafe condition for certain Pacific Aerospace Limited Model 750XL airplanes.

The MCAI states:

DCA/750XL/35 is prompted by a review of the engine installation procedures, which identified that the clearance between the engine mount, the Beta control rod and the inter-turbine temperature (ITT) sensing probe could be insufficient and result in chafing damage. The [CAA] AD is issued to introduce the instructions in Pacific Aerospace Mandatory Service Bulletin (MSB) PACSB/XL/102 issue 2, dated 5 November 2018.

You may examine the MCAI in the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0604.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Linx (11.03.24)

Aero Linx: Not Plane Jane Airplanes have always been a part of my life. My family was actively involved in aviation, and operated an FBO with sales worldwide for nearly fifty years>[...]

Aero-News: Quote of the Day (11.03.24)

“As a young child, I intently listened to my grandfather’s flying stories including his role in the Berlin Airlift. Colonel Halverson’s legendary exploits, which >[...]

ANN's Daily Aero-Term (11.03.24): Light Gun

Light Gun A handheld directional light signaling device which emits a brilliant narrow beam of white, green, or red light as selected by the tower controller. The color and type of>[...]

Airborne 10.30.24: ArkanSTOL Suspended, Stratolaunch Expands, Artemus III

Also: Boeing To Sell Off Space Biz?, Naval Aviator Honors, Prop Accident, More B-21s? The ArkanSTOL executive team announced that its annual event and competition would be suspende>[...]

Airborne 11.01.24: XB-1 Flies Again, Evektor Fleet Sale, Zepp Record Remembered

Also: Senator Pushes FAA, Gulfstream Goes Starlink, Crew-8 Astro Out of Hospital, PC-12 Flight Hours Boom Supersonic’s XB-1 demonstrator aircraft successfully carried out Fli>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC