Jim Bede Announces BD-18 Two Seater | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Thu, Jul 31, 2003

Jim Bede Announces BD-18 Two Seater

ANN Exclusive! Two seat BD-17 is a natural evolution of the design

By ANN Correspondent Juan Jimenez

It's happened again - Jim Bede has announced a new aircraft design, this time the BD-18, a two-seat version of the BD-17. Not surprisingly, it looks like what the BD-17 suggests itself to be - a very close cousin to the BD-1, which went on to become the AA-1 Yankee, and which in years past evolved into the AA-1B Grumman Trainer, AA-1C Lynx and AA-5 Traveler, among others.

What this reporter did not expect, though, was that the BD-18 would be a side-by-side two-seater. Some months ago ANN had discussed the possibility of a larger BD-17, and there was some mention of a tandem seating design. However, the BD-18 makes sense - a tandem design means having to recalculate and redesign for a redistribution in weight, Going from one seat to side-by-side seating, though, means figuring out how to handle additional weight at roughly the same station.

The truly surprising aspect of the BD-18, however, is that it is designed to be built both as a kit and as a plans-built aircraft, from scratch. As with the BD-17 - as well as some of Bede's previous designs - the BD-18's entire fuselage is built from one-half inch thick honeycomb panel made of 0.020 2024-T3 sheets bonded to a metal honeycomb core with a one-quarter inch cell size. According to Bede, the panels have the strength of a 0.040 2024-T3 sheet in tension, 80 percent of the strength of a solid one-half inch plate in torsion, but weight only 0.75 lbs per square foot.

This honeycomb panel material can also absorb a large amount of impact energy, giving the structure an above average crash-worthiness. As if that were not enough, the panels float.

Specifications for the aircraft are available on Jim's web site listed below, but some of the highlights are estimated cruising speeds of between 142 and 196 mph depending on the choice of engine and propeller, and dirty stall speeds of between 52 and 61 mph. This is definitely not an aircraft designed to qualify for the new Sport Pilot program,

FMI: www.jimbede.com

Advertisement

More News

Classic Aero-TV: Up Close And Personal - The Aeroshell Aerobatic Team at Oshkosh

From 2014 (YouTube Version): One Of The Airshow World's Pre-Eminent Formation Teams Chats About The State Of The Industry At EAA AirVenture 2014, ANN News Editor Tom Patton gets th>[...]

ANN's Daily Aero-Term (07.13.25): Tactical Air Navigation (TACAN)

Tactical Air Navigation (TACAN) An ultra-high frequency electronic rho-theta air navigation aid which provides suitably equipped aircraft a continuous indication of bearing and dis>[...]

ANN's Daily Aero-Linx (07.13.25)

Aero Linx: Doobert Hi, we're Chris & Rachael Roy, founders and owners of Doobert. Chris is a technology guy in his “day” job and used his experience to create Doobe>[...]

NTSB Prelim: Pitts S2

The Airplane Was Spinning In A Nose-Down Attitude Before It Impacted Terrain On June 20, 2025, at 0900 eastern daylight time, a Pitts Aerobatics S-2B, N79AV, was destroyed when it >[...]

Airborne 07.09.25: B-17 Sentimental Journey, Airport Scandal, NORAD Intercepts

Also: United Elite Sues, Newark ATC Transitions, Discovery Moves?, Textron @ KOSH The Commemorative Air Force Airbase Arizona is taking its “Flying Legends of Victory Tour&rd>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC