First Completed Bearhawk Model 5 Takes Flight | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Sat, Nov 12, 2022

First Completed Bearhawk Model 5 Takes Flight

6-Seat, High-Performance Bushplane Takes to the Skies with Experienced Bearhawk Pilot

Bearhawk Aircraft has announced the first flight of a full, kit-built Model 5, opening a new era for the company's newest hot rod.

Rollie Van Dorn completed the first 25 hours in the completed Bearhawk 5, comparing it to previous entries in the company lineup like the smaller, 2-seat Patrol. The 6-seater is reportedly a total sweetheart, he said. “When maneuvering, the larger Model 5 feels the same as the Patrol. Ailerons actually feel lighter. I expected this build to perform exactly the same as the prototype, and it did without exception.”

In his first evaluation, Van Dorn flew for 8.7 hours, racking up more than 20 landings in getting a feel for the brand new plane. Notes from his flight report an indicated 142 knots cruise at 8,500 feet with the throttle at 24-square. Altitude was easily maintained with reduced power, with fuel consumption ranging between 11.0–15.7 gallons per hour. In pitching up he reports the aircraft exhibited gentle manners, as well as when maneuvering in steep turns.

“The Model 5 lands nicely and goes really fast," he said. “I was able to skywrite and view Bearhawk on my G3X and ADS-B displays. This made the time go by faster but also heightened my appreciation for the Model 5’s agile flying qualities." 

The backcountry brawler is a 6-spot design perfect for unimproved runways and short field performance with more than enough pep to climb back out. The kit in its completed form uses a 300 hp IO-540 and 82" 3-blade Hartzell prop, granting it a power-to-weight in the neighborhood of even competition aerobatic aircraft. The fuselage is welded 4130 tubing, fabric covered with 0.025/0.032 on a Riblet airfoil common to all Bearhawk designs.

FMI: www.bearhawkaircraft.com

Advertisement

More News

ANN's Daily Aero-Linx (06.29.25)

Aero Linx: Transport Canada We are a federal institution, leading the Transport Canada portfolio and working with our partners. Transport Canada is responsible for transportation p>[...]

ANN's Daily Aero-Term (06.29.25): Gross Navigation Error (GNE)

Gross Navigation Error (GNE) A lateral deviation from a cleared track, normally in excess of 25 Nautical Miles (NM). More stringent standards (for example, 10NM in some parts of th>[...]

Classic Aero-TV: Anticipating Futurespace - Blue Origin Visits Airventure 2017

From AirVenture 2017 (YouTube Edition): Flight-Proven Booster On Display At AirVenture… EAA AirVenture Oshkosh is known primarily as a celebration of experimental and amateu>[...]

NTSB Final Report: Cirrus SR22

Aircraft Parachute System (CAPS) Was Deployed About 293 Ft Above Ground Level, Which Was Too Low To Allow For Full Deployment Of The Parachute System Analysis: The day before the a>[...]

Airborne Affordable Flyers 06.26.25: PA18 Upgrades, ‘Delta Force’, Rhinebeck

Also: 48th Annual Air Race Classic, Hot Air Balloon Fire, FAA v Banning 100LL, Complete Remote Pilot The news Piper PA-18 Super Cub owners have been waiting for has finally arrived>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC