Wed, Apr 23, 2014
Company Says The Modifications Eliminate Factors That Led To North Sea Ditchings
The redesigned vertical bevel gear shaft for Airbus Helicopters’ EC225 has been certified, enabling its production and installation on all rotorcraft of this type in operation globally, as well as those being produced. Certification was granted by EASA and is to be followed by validation from other international airworthiness authorities.
Manufacturing of the redesigned gear shaft is underway, allowing worldwide implementation on concerned aircraft in service and in production, starting in the second semester of 2014.
“Airbus Helicopters has put a very high priority on developing this new shaft for the EC225. EASA’s certification is a major milestone towards getting our customers flying with the final solution,” said Jean-Brice Dumont, Airbus Helicopters’ Executive Vice President – Engineering.
The new design eliminates all three factors that, in combination, had caused two unexpected vertical shaft ruptures. It provides corrosion resistance, compensates for residual stress and eliminates stress hot spots. Following two EC225 controlled ditchings in the North Sea in 2012 and the suspension of part of the aircraft’s fleet, precautionary and preventive measures were immediately developed by Airbus Helicopters and successfully implemented by operators, leading to a full return to service.
As the latest evolution of Airbus Helicopters’ Super Puma family, more than 200 EC225/725s have been delivered to 35 operators, accumulating more than 350,000 flight hours. Tailored for the most demanding operators, the workhorse EC225 is an 11-ton helicopter integrating all of the latest technological innovations.
(EC225 Image from file)
More News
“This recognition was evident during the TBMOPA Annual Convention, where owners and operators clearly expressed their satisfaction with our focus on customer service, and enc>[...]
Overhead Maneuver A series of predetermined maneuvers prescribed for aircraft (often in formation) for entry into the visual flight rules (VFR) traffic pattern and to proceed to a >[...]
Aero Linx: Glenn H. Curtiss Museum The Glenn H. Curtiss Museum, bearing the name of Hammondsport’s favorite son, is located on State Route 54, one half mile south of the vill>[...]
The Flight Instructor Noticed Some Engine Roughness And Diverted Toward Westwinds Airport On November 2, 2025, about 1630 mountain standard time, an experimental amateur-built Just>[...]
From 2014 (YouTube Edition) -- Disclaimer: No Matter What He Tells You, Tom Is Not A Certified Firefighting Pilot While at EAA AirVenture 2014, ANN News Editor, Tom Patton checked >[...]
Aero-News: Quote of the Day (11.20.25)
See All